Jorge Assunção's repositories
MAID-EM
The MAID - Energy Monitor is an energy monitor based on a ESP8266 board that uses the XTM18S (or compatible) single phase energy meter to get energy readings. The energy monitor is MQTT enabled and sends readings for power (W), consumption (kWh) and accumulated consumption (kWh), and with a couple tricks you can also get apparent power (kVA) and current (A).
Adafruit-ST7735-Library
Fork that adds ESP8266 support and a few performance optimisations.
DUMB2SMART
The DUMB2SMART is a way for some dumb equipment to gain some intelligence and inform a MQTT broker if they are ON or OFF. It was developed for use with ESP-01 in mind but can be used with other ESPs.
DUMB2SMART-Lite
The DUMB2SMART Lite is a way for some dumb equipment to gain some intelligence and inform a MQTT broker if they are ON or OFF. It was developed for use with ESP-01 in mind but can be used with other ESPs.
MAID-DWS
MAID - Door and Window Sensor
MAID-EM-v2
The **MAID-EM v2 - Energy Monitor** is an energy monitor based on a ESP8266 board that uses the SDM120 (or compatible) single phase energy meter to get energy readings. The energy monitor is MQTT enabled and sends readings for all the values measured by the meter.
android-mqtt-alarm-panel
Android Alarm Panel for Home Assistant
Ariela
Ariela
Breathe
Arduino library for a pleasing LED fading/blinking effect.
chartjs-card
Chart.js card for Home Assistant
discourse-characters-required
Display how many characters are required before a post be made
discourse-yearly-review
Publishes an automated Year in Review topic
Email-Boilerplate
The email boilerplate for sending out nicely formatted messages.
esp-rfid
ESP8266 RFID (RC522, PN532, Wiegand) Access Control system featuring WebSocket, JSON, NTP Client, Javascript, SPIFFS
homeThing
Wifi Smart Home Remotes that run on ESPHome
LowCostLoRaGw
Low-cost LoRa IoT & gateway with SX1272/76, Raspberry and Arduino
osTicket
The osTicket open source ticketing system official project repository, for versions 1.8 and later
payload-codec
Codec functions for encoding and decoding payloads of endpoints messages
semantic-release-action
GitHub Action for running semantic-release. Respects any .releaserc.js configuration file in your repo. Sets output and environment variables for you to use in subsequent actions.
TTGO-LORA32-V2.0
ESP32-TTGO-T3