The following are scripts I use in conjunction with my Homematic installation. I do tend not to use additional modules / software on my systems, so things should work without additions.
WLAN Presence Script (presencedetection.sh)
A script for routers to detect presence of specific devices (by ethernetaddress) or IP ranges (e.g. guests). On detection it will call a URL with a presence flag. Presence is detected by using the arp table of the device and will call given URLs in the event a presence changes. Only changes will be transmitted so very low traffic is generated. No presence detections are lost as the script retries if the destination is not ready for reception. This script runs on my router (a fritz!box, but should work on any unix based router). Currently the script sets presence variables on a HomeMatic CCU2, but could be used for other systems as well.
Presence Aggregation (presenceVariableAggregation.hms)
Not all persons have a WLAN device to track their presence in the house. So I have variables that can be manually set, or set via a calendar/timetable. Furthermore there is the possibilty to define kids as persons that are at home only if an adult person is at home.
Lets assume the following variables are set:
presence.wlan.guests: away
presence.wlan.patrick: PRESENT
presence.wlan.isabel: away
presence.manual.guests: away
presence.manual.patrick: away
presence.manual.isabel: PRESENT
presence.calender.guests: away
presence.calender.patrick: away
presence.calender.isabel: away
.
.
.
The presenceVariableAggregation.hms script creates then aggregated presence variables:
presence.any: PRESENT
presence.guests: away
presence.patrick: PRESENT
presence.isabel: PRESENT
.
.
.
Those variables are the ones I use in the different scripts.
This is the main script for my heating system. It sets the SET_TEMPERATURE on the thermostats when they are in automode. The SET_TEMPERATURE is depended if and which person is in a room, if windows or doors are open or people are presumed to be in a room cause a switch (e.g. lights, plugs) is engaged.
The script uses a table to know the preferences of the different person groups:
presence.guests: hall 0:00,17C 6:00,18.5C 7:30,19.5C 19:30,20C
living 0:00,17C 7:30,19C 19:30,20C
kitchen 0:00,17C 6:00,18.5C 7:30,20C 20:30,17C
guests 0:00,17C 8:00:16C 21:00,17.5C
presence.patrick: hall 0:00,16C 7:30:18C 20:30,19C
living 0:00,16C 7:30:17C 20:30,18C
kitchen 0:00,16C 7:30,18C 20:30,17C
office 0:00,16C 7:30,19.5C 19:30,16.5C
sleeping 0:00,15C 8:00,10C 22:00,16C
This script automtically finds out all heating thermostats and turns the main switch for the heating system on depending on the actual and set temperatures as well as valve states of the thermostats.
This script finds out all heating thermostats and sets them all to manual off state or auto mode depending on a switch state. So a single main switch can turn off all thermostats.
This script turns my boiler when someone arrives at home and the boiler has not been turned on for 24 hours. Usually that is the case after a vacation, then I want to make sure I can take a shower instantly.
Creates a inventory of your devices (in english or german) like this:
212 Kanaele in 38 Geraeten, 13 Geraetetypen:
3x HM-LC-Sw1PBU-FM, 7x HM-ES-PMSw1-Pl, 7x HM-Sec-SCo, 5x HM-Sec-SD, 7x HM-CC-RT-DN, 1x HM-RCV-50, 1x HM-Sec-SC-2, 1x HM-ES-TX-WM, 2x HM-Sec-WDS-2, 1x HM-LC-Sw4-SM, 1x HmIP-RCV-50, 1x HM-Sec-SD-Team, 1x HM-PB-2-WM55