joholl / rpi4-uboot-tpm

How to use a TPM in U-Boot on Raspberry Pi 4

joholl/rpi4-uboot-tpm Issues

PCR register value will reset to deafult when power on reset
Updated 3 months ago1
LPC tpm cycle
Closed a year ago2
How to get into U-boot shell?
Closed a year ago5
How to add the crypto APIs of tpm in u-boot?
Closed a year ago1
Is compatible with tpm2-tss
Closed a year ago1
StMaHa fork and Raspberry 3B+
Updated a year ago
README.md has SPI_SOFT.
Closed 2 years ago1
how to add and verify the tpm2.0 nv commands in the u-boot
Closed 2 years ago14
the U-Boot does not outpt boot message
Closed 2 years ago4
Couldn't set TPM 0 (rc = 1) error
Closed 3 years ago3
Support for tpm2 activate credential command in u-boot?
Closed 2 years ago2
TPM-slb9670 with rpi4b tpm_tis_spi_probe: missing reset GPIO tpm_tis_spi_probe: no device found Couldn't set TPM 0 (rc = 1) error
Closed 2 years ago7
How to set the PCR's in u-boot
Closed 2 years ago3
How to verify u-boot
Closed 2 years ago2
Screen is not full
Closed 2 years ago1
Procedure for Raspberry Pi 3 (B+)
Closed 3 years ago3
tpm_tis_spi_valid_status always returning ff as status this causesTPM commands to not work
Closed 4 years ago3
tpm2 init is not working with uboot with these instructions.
Closed 4 years ago15