joelsernamoreno / badusb_sd_wifi

BadUSB with WiFi that allows to execute payloads from SD

badusb_sd_wifi

BadUSB with WiFi that allows to execute payloads from SD

ESP code is based on the ESPloitV2 code (created by Corey Harding).

www.LegacySecurityGroup.com / www.Exploit.Agency https://github.com/exploitagency/ESPloitV2

ESPloit is distributed under the MIT License. The license and copyright notice can not be removed and must be distributed alongside all future copies of the software.

Special thanks to:

• @Santpapen
• @ernesto_xload
• @LucaBongiorni
• @WHID Injector

BadUSB SD WiFi V1: functional version, but still being tested:

Hardware CJMCU-3212: https://es.aliexpress.com/store/product/Beetle-Virtual-Keyboard-Badusb-Development-Board-ATMEGA32U4-WIFI-ESP8266-ESP-12E-TF-Micro-SD-Card-Storage/2130127_32839570915.html

1.- Functionalities 2.- Payloads syntax 3.- Instalation 4.- Upload HTML by FTP

1.- WiFi functionalities:

• Virtual Keyboard: Allows to have a virtual keyboard on the screen (it is recommended to use it in mobile phones).

• Physical Keyboard: This utility has two options: Pc or mobile phone.

Pc: If accessed from a computer, it allows you to use your computer's physical keyboard to send pressed keys to the computer where the badUSB is connected.

Phone: If accessed from your mobile phone, allows you to use your mobile phone keyboard from a textarea.

• Live Payload: Allows to execute commands and payloads from a textarea.

• Choose Payload: Allows you to delete and execute payloads that are stored on the device.

• Upload Payload: Allows you to upload a payload to the device.

• FTP Server: The device has an FTP server enabled. You can use the pftp -i 192.168.1.1 command (Linux) to connect to it.

2.- Payloads syntax:

• print (example: print test)
• println (example: println test)
• press (example: press KEY_RETURN)
• rawpress (example: press KEY_RETURN)
• delay (example: delay 1000)
• release (example: release)
• runwin (example: runwin)
• rungnome (example: rungnome)
• runmac (example: runmac)
• execSD ((example: execSD test.txt, execSD helloworld.txt, execSD remote.txt, etc)

In my github you can find example payloads for this device (coming soon).

3.- Installation:

• Download and Install the Arduino IDE: https://www.arduino.cc/en/main/software

• Go to File - Preferences. Locate the field "Additional Board Manager URLs:" Add "http://arduino.esp8266.com/stable/package_esp8266com_index.json" without quotes. Click "Ok"

• If Arduino IDE gives you the following error: "Error downloading http://arduino.esp8266.com/stable/package_esp8266com_index.json" use "https://github.com/esp8266/Arduino/releases/download/2.3.0/package_esp8266com_index.json" instead.

• Select Tools - Board - Boards Manager. Search for "esp8266". Install "esp8266 by ESP8266 community version 2.3.0". Click "Close".

• Download simple FTP server and copy into the arduino library directory: https://github.com/nailbuster/esp8266FTPServer

• Download/extract BadUSB WiFi SD repo.

Upload sketch esp8266Programmer

• Load the esp8266Programmer sketch from the flashing folder.

• Select Tools - Board – "Arduino Leonardo".

• Select the Port your device is connected to under Tools – Port.

• Upload the sketch.

PROGRAMMING MODE ESP8266

• Open the ESP_Code sketch from the source folder.

• Select Tools - Board - "Generic ESP8266 Module".

• Select Tools – Upload Speed “115200”

• Select Tools – Flash Size “512K (64K SPIFFS)”

• Select Sketch - "Export Compiled Binary".

• Now start ESP8266 in programming mode.

• Now flash the firmware to the ESP chip using one of the following tools.

Linux: https://github.com/AprilBrother/esptool

sudo python esptool.py --port=/dev/ttyACM0 --baud 115200 write_flash 0x00000 /home/badusb_sd_wifi/esp/esp.ino.generic.bin --flash_size 32m

Windows: https://github.com/nodemcu/nodemcu-flasher

Upload sketch atmega32u4_code

• Finally open the Arduino_32u4_code sketch from the source folder.

• Select Tools - Board – "Arduino Leonardo".

• Select the Port your device is connected to under Tools – Port.

• Upload the sketch.

4.- Upload HTML by FTP

• Visualize the wifi networks around you and connect to the badusb wifi network

• Enter the password for the wifi network (default password: badUSBWifi)

• Open a terminal in the HTML directory

• Connect to the badusb FTP server with the following command (linux): pftp -i 192.168.1.1

• Enter the FTP server username and password (default username and password: esp8266)

• Upload all HTML from the directory (example command: put virtualkeyboard.html)

• When you have all the HTML files uploaded, disconnect and reconnect the badusb

• Reconnect to the badusb wifi network and enter password (default password: badUSBWifi)

• Open a browser and access the badusb web panel (default IP: 192.168.1.1)

For any questions you can contact me by twitter: @JoelSernaMoreno