To start your Nerves app:
- Install dependencies with
mix deps.get - Create firmware with
mix firmware - Burn to an SD card with
mix firmware.burn
This project is set up for rpi by default but can be used with other versions of raspberry pi as shown below:
mix firmware NERVES_TARGET=rpi3
mix firmware.burn NERVES_TARGET=rpi3
- Official docs: https://hexdocs.pm/nerves/getting-started.html
- Official website: http://www.nerves-project.org/
- Discussion Slack elixir-lang #nerves (Invite)
- Source: https://github.com/nerves-project/nerves