https://www.aliexpress.com/item/4000006937156.html?spm=a2g0o.order_list.0.0.21ef18027XWq0n
The control micro-usb port on the kvm switch isn't really usb it is rs232 at 5V. However the logic levels of the RX/TX signals are inverted. The easiest solution for this is to get a serial adater that supports this rare feature like the FTDI FT232.
In order to invert the RX/TX signals, you can use ft_prog and set the following settings:
Signal | Color | FT232 Pin |
---|---|---|
VCC | red | - |
D- | white | RX |
D+ | green | Tx |
GND | black | GND |