gpsd-prometheus-exporter
gpsd-prometheus-exporter is a Prometheus exporter for the gpsd GPS daemon.
It connects to the TCP port of the GPSD daemon and records relevant statistics and formats them as an Prometheus data exporter which you can visualze later in tools like grafana.
Instalation:
Make sure gpsd, prometheus and grafana are properly running. gpsd-prometheus-exporterneeds python3 and the following python libraries:
- prometheus_client
- gps-python libraries gps Note that this exporter needs at least version 3.19 of the lib's. Normally this comes with the instalation of gpsd.
To install:
pip3 install prometheus_client
pip3 install gps
If you want the gpsd-prometheus-exporter to be loaded automatically by systemd please copy gpsd_monitor.defaults to
/etc/default/gpsd_monitor.defaults and gpsd_monitor.service to /lib/systemd/system
git clone git@github.com:brendanbank/gpsd-prometheus-exporter.git
cd gpsd-prometheus-exporter
sudo cp gpsd_exporter.defaults /etc/default
sudo cp gpsd_exporter.service /lib/systemd/system
sudo cp gpsd_exporter.py /usr/local/bin
Make sure gpsd_exporter.py has the execution bit set:
chmod +x /usr/local/bin/gpsd_exporter.py
And enable the serivce to run at boot.
systemctl enable gpsd_exporter.service
systemctl start gpsd_exporter.service
Some U-Blox GPS units need to be forced to 115200 baud
Check out gps_setserial.serivce to run at boot time.
The default tcp port is 9015. You can test if the exporter is up by running the follwing command on the local machine:
curl -s localhost:9015
And you should see output like this:
# HELP gpsd_gdop Geometric (hyperspherical) dilution of precision
# TYPE gpsd_gdop gauge
gpsd_gdop 1.36
# HELP gpsd_hdop Horizontal dilution of precision
# TYPE gpsd_hdop gauge
gpsd_hdop 0.74
gpsd_xdop 0.39
# HELP gpsd_nSat Number of satellite objects in "satellites" array
# TYPE gpsd_nSat gauge
gpsd_nSat 0.0
# HELP gpsd_uSat Number of satellites used in navigation solution.
# TYPE gpsd_uSat gauge
gpsd_uSat 0.0
# HELP gpsd_lat Latitude in degrees: +/- signifies North/South.
# TYPE gpsd_lat gauge
gpsd_lat 52.4240029
# HELP gpsd_long Longitude in degrees: +/- signifies East/West.
# TYPE gpsd_long gauge
gpsd_long 4.6157675
# HELP gpsd_altHAE Altitude, height above allipsoid, in meters. Probably WGS84.
# TYPE gpsd_altHAE gauge
gpsd_altHAE 62.191
# HELP gpsd_altMSL MSL Altitude in meters. The geoid used is rarely specified and is often inaccurate.
# TYPE gpsd_altMSL gauge
gpsd_altMSL 16.309
# HELP gpsd_sat_used Used in current solution?
# TYPE gpsd_sat_used gauge
gpsd_sat_used 19.0
# HELP gpsd_sat_seen Seen in current solution?
# TYPE gpsd_sat_seen gauge
gpsd_sat_seen 34.0
# HELP gpsd_version_info Version Details
# TYPE gpsd_version_info gauge
gpsd_version_info{proto_major="3",proto_minor="14",release="3.20",rev="3.20"} 1.0
# HELP gpsd_devices_info Device Details
# TYPE gpsd_devices_info gauge
gpsd_devices_info{activated="2021-01-20T12:22:31.083Z",bps="115200",cycle="1.0",device="/dev/ttyS0",driver="u-blox",flags="1",mincycle="0.25",native="1",parity="N",stopbits="1",subtype="SW ROM CORE 3.01 (107888),HW 00080000",subtype1=",FWVER=SPG 3.01,PROTVER=18.00,GPS;GLO;GAL;BDS,SBAS;IMES;QZSS"} 1.0
gpsd_devices_info{activated="2021-01-20T12:22:31.003Z",bps="Unknown",cycle="Unknown",device="/dev/pps0",driver="PPS",flags="Unknown",mincycle="Unknown",native="Unknown",parity="Unknown",stopbits="Unknown",subtype="Unknown",subtype1="Unknown"} 1.0
...
To make sure prometheus is polling the exporter add the following line to /etc/prometheus/prometeus.yml on the prometheus server.
- job_name: gps
static_configs:
- targets:
- <hostname>:9015
Be carefull not to break with the yml document format as it will block propper startup of prometheus.
I've included a grafana dashboard json file which you can load into grafana.
Per Satilite data
PPS
If you enable gpsd to monitor your pps device by starting
gpsd <option> [serial port path] [/dev/pps[0-..]
the exporter will monitor the clock offset from from the pps signal. And you can monitor the offset of your system clock.
To eable pps monitoring add --pps-histogram to the runtime arguments of gpsd_exporter.py
Graph offset from a stationairy
runtime commands
./gpsd_exporter.py -h
usage: gpsd_exporter.py [-h] [-v] [-V] [-d] [-p PORT] [-E EXPORTER_PORT] [-H HOSTNAME]
[-S] [--offset-from-geopoint] [--geopoint-lat GEO_LAT] [--geopoint-lon GEO_LON]
[--geo-bucket-size GEO_BUCKET_SIZE] [--geo-bucket-count GEO_BUCKET_COUNT]
[--pps-histogram] [--pps-bucket-size PPS_BUCKET_SIZE]
[--pps-bucket-count PPS_BUCKET_COUNT] [--pps-time1 PPS_TIME1]
gpsd_exporter -- Exporter for gpsd output
Created by Brendan Bank on 2021-01-10.
Copyright 2021 Brendan Bank. All rights reserved.
Licensed under the BSD-3-Clause
https://opensource.org/licenses/BSD-3-Clause
Distributed on an "AS IS" basis without warranties
or conditions of any kind, either express or implied.
USAGE
optional arguments:
-h, --help show this help message and exit
-v, --verbose set verbosity level [default: None]
-V, --version show program's version number and exit
-d, --debug set debug level [default: 0]
-p PORT, --port PORT set gpsd TCP Port number to connect to [default: 2947]
-H HOSTNAME, --hostname HOSTNAME
set gpsd TCP Hostname/IP address [default: localhost]
-E EXPORTER_PORT, --exporter-port EXPORTER_PORT
set TCP Port for the exporter server [default: 9015]
-S, --disable-monitor-satellites
Stops monitoring all satellites individually
--offset-from-geopoint
track offset (x,y and distance) from a stationary location.
--geopoint-lat GEO_LAT
Latitude of a fixed stationary location.
--geopoint-lon GEO_LON
Longitude of a fixed stationary location.
--geo-bucket-size GEO_BUCKET_SIZE
Bucket side of Geo histogram [default: 0.5 meter]
--geo-bucket-count GEO_BUCKET_COUNT
Bucket count of Geo histogram [default: 40]
--pps-histogram generate histogram data from pps devices.
--pps-bucket-size PPS_BUCKET_SIZE
Bucket side of PPS histogram [default: 250 ns] (nano seconds)
--pps-bucket-count PPS_BUCKET_COUNT
Bucket count of PPS histogram [default: 40]
--pps-time1 PPS_TIME1
Local pps clock (offset) time1 (ntp.conf) [default: 0]