This is a port of some of Mutable Instruments Plaits oscillators to the Korg Prologue MultiEngine.
Name | Oscillator | Shape operation |
Shift-shape operation |
---|---|---|---|
mo2_va |
Pair of classic waveforms | Shape | Pulse width |
mo2_wsh |
Waveshaping oscillator | Amount | Waveform |
mo2_fm |
Two operator FM | Modulation index | Frequency ratio |
mo2_grn |
Granular formant oscillator | Frequency ratio | Formant frequency |
mo2_add |
Harmonic oscillator | Index of prominent harmonic | Bump shape |
mo2_wta -mo2_wtf * |
Wavetable oscillator | Row index | Column index |
* Due to the 32k size constraint in the MultiEngine the Wavetable oscillator is split into 6 oscillators with 4 'rows' each.
In the Multi-engine menu you can find additional parameters for the oscillators.
Parameter 1
is oscillator specific and controls whichever parameter is not mapped to Shape
or Shift-shape
Parameter 2
sets the mix between the oscillator out
and aux
.
Parameter 3
sets the Shape LFO target according to the table below:
LFO Target | Parameter | Notes |
---|---|---|
1 | Shape |
|
2 | Shift-shape |
|
3 | Parameter 1 |
Not implemented for Wavetable oscillator |
3 | Parameter 2 |
For more information please read the excellent Mutable Instruments Plaits documentation.
- The Prologue Librarian tends to timeout when transferring the user oscillator, however the transfer is still complete. Try adding the user oscillator one at a time and Send All / Receive All for each oscillator.
- Checkout the repo (including subrepos)
- Follow the toolchain installation instructions in the
logue-sdk
- Build with
make
(only tested on MacOSX)