jithinkmatthew / raspberry-pi

Getting started with raspberry-pi

raspberry-pi

To Flash memmory card

• Download the image from https://www.raspberrypi.org/downloads/raspberry-pi-os/
• Flash the image by using https://www.balena.io/etcher/

Create first ssh connection

• Once the flashing completed, create a new ssh file inside boot folder.

touch ssh

• Add details inside wpa_supplicant.conf file(File Location : /boot/wpa_supplicant.conf)

vi wpa_supplicant.conf

# add the following details
#
# ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
# update_config=1
# country=US
#
# network={
#  ssid="wifi"
#  psk="password"
#  key_mgmt=WPA-PSK	
# }
#
#

• Save the file and insert memmory card in ras-pi

Get device names from a wifi network

sudo apt-get install arp-scan

sudo arp-scan 192.168.1.0/24

Connecting to pi

• Create a new ssh coonection to the ras-pi by

ssh pi@192.168.3.11

default username: pi default password: raspberry

Install VNC server inside pi

• Download and install vnc server

sudo apt-get update

sudo apt-get install tightvncserver

• Set one time password for the VNC Server

tightvncserver

• Set the VNC resolution

vncserver :1 geometry 1024x768

Connect the vnc from another device

• Enter the ip address in the following format

  sudo apt install tigervnc-viewer
  vncviewer <ip>:<display/port>

Example

vncviewer 192.168.0.8:2