Wake is a build orchestration tool and language. If you have a build whose steps cannot be adequately expressed in make/tup/bazel/etc, you probably need wake. If you don't want to waste time rebuilding things that don't need it, or that your colleagues already built, you might appreciate wake.
-
dependent job execution
Which jobs to run next can depend on the results of previous jobs. For example, when you run configure in a traditional automake system, this typically affects what will be built by make. Similarly cmake. These two-stage build systems are necessary because make job selection cannot depend on the result of a prior build step. In complicated builds, two-stages are sometimes not enough. In wake, all jobs may be dependent.
-
dependency analysis
In classic build systems, you must specify all the inputs and outputs of a job you want to run. If you under-specify the inputs, the build is not reproducible; it might fail to compile files that need recompilation and the job might fail non-deterministically on systems which run more jobs simultaneously. If you over-specify the inputs, the build performs unnecessary recompilation when those inputs change. In wake, if you under-specify the inputs, the build fails every time. If you over-specify the inputs, wake automatically prunes the unused dependencies so the job will not be re-run unless it must. You almost never need to tell wake what files a job builds; it knows.
-
build introspection
When you have a built workspace, it is helpful to be able to trace the provenance of build artefacts. Wake keeps a database to record what it did. You can query that database at any time to find out exactly how a file in your workspace got there.
-
intrinsically-parallel language
While your build orchestration files describe a sequence of compilation steps, the wake language automatically extracts parallelism. Everything runs at once. Only true data dependencies cause wake to sequence jobs. Wake handles parallelism for you, so you don't need to think about it.
-
shared build caching
You just checked-out the master branch and started a build. However, your system runs the same software as your colleague who authored that commit. If wake can prove it's safe, it will just copy the prebuilt files and save you time. This can also translate into pull requests whose regression tests pass immediately, increasing productivity.
On Debian/Ubuntu (wheezy or later):
sudo apt-get install makedev fuse libfuse-dev libsqlite3-dev libgmp-dev libncurses5-dev pkg-config git g++ gcc libre2-dev dash
On Redhat (6.6 or later):
sudo yum install epel-release epel-release centos-release-scl
# On RHEL6: sudo yum install devtoolset-6-gcc devtoolset-6-gcc-c++
sudo yum install makedev fuse fuse-devel sqlite-devel gmp-devel ncurses-devel pkgconfig git gcc gcc-c++ re2-devel dash
On FreeBSD (12 or later):
pkg install gmake pkgconf gmp re2 sqlite3 fusefs-libs dash
echo 'fuse_load="YES"' >> /boot/loader.conf
echo 'vfs.usermount=1' >> /etc/sysctl.conf
pw groupmod operator -m YOUR-NON-ROOT-USER
reboot
On Alpine Linux (3.14.0 or later):
apk add g++ make pkgconf git gmp-dev re2-dev sqlite-dev fuse-dev ncurses-dev dash
Alpine releases as old as 3.11.5 may work depending on the use case, but due to a limitation in older musl versions some jobs may be rebuilt unnecessarily.
On Mac OS with Mac Ports installed:
sudo port install osxfuse sqlite3 gmp re2 ncurses pkgconfig dash
On Mac OS with Home Brew installed:
brew install gmp re2 pkgconfig dash
Fuse is slightly more complicated, it requires permissions.
brew tap homebrew/cask
brew cask install osxfuse
You should see something like the following, and MacOS may ask for your password.
You must reboot for the installation of osxfuse to take effect.
System Extension Blocked
"The system extension required for mounting FUSE volumes could not be loaded.
Please open the Security & Privacy System Preferences pane, go to the General preferences and allow loading system software from developer "Benjamin Fleischer".
Then try mounting the volume again."
Give FUSE permission to run as stated in the instructions and you should be good to go.
git clone https://github.com/sifive/wake.git
cd wake
git tag # See what versions exist
#git checkout master # Use development branch (e.g. recent bug fix)
#git checkout v0.24 # Check out a specific version, like v0.24
make
./bin/wake install $HOME/stuff # or wherever
Name | Version | License |
---|---|---|
External dependencies | ||
c++ 11 | >= 4.7 | GPLv3 |
dash | >= 0.5 | BSD 3-clause |
sqlite3-dev | >= 3.6 | public domain |
libgmp-dev | >= 4.3 | LGPL v3 |
libfuse-dev | >= 2.8 | LGPL v2.1 |
libre2-dev | >= 2013 | BSD 3-clause |
libncurses5-dev | >= 5.7 | MIT |
m4 | >= 1.4 | GPLv3 |
Optional dependencies | ||
re2c | >= 1.0 | public domain |
utf8proc | >= 2.0 | MIT |
Internal dependencies | ||
lemon | 2021-09 | public domain |
gopt | 10.0 | TFL |
SipHash | 2017-02 | CC0 |
BLAKE2 | 2018-07 | CC0 |
whereami | 2018-09 | WTFPLV2 |
Certain characteristics of wake execution can be configured for all invocations of the wake tool. For example, the repo may set the minimum wake version or a user may set the verbosity of a log message. This is achieved via two config files: .wakeroot and the user config. The user config overrides .wakeroot if two values conflict. Certain values may only be specified in a specific location. For example, min version may only be set in the .wakeroot. Both files contain JSON5 source where the root object may contain the following keys.
Key | Description | Required | Type | .wakeroot | user config | Default |
---|---|---|---|---|---|---|
version | SemVer compatible with the repo | No | SemVer string | Yes | No | "" |
user_config | Path to user config for this repo. Allows a different config for each repo. | No | shell expandable path string | Yes | No | $XDG_CONFIG_HOME/wake.json if $XDG_CONFIG_HOME set, $HOME/.config/wake.json otherwise |
log_header | A string containing $stream and $source that will prepend every line of a jobs output |
No | An interpolated string | Yes | Yes | '[$stream] $source: ' |
log_header_source_width | An integer that specifies the width of the $source variable in log_header |
No | Positive Integer | Yes | Yes | 25 |
log_header_align | A boolean that specifies whether or not to align log header output | No | Boolean | Yes | Yes | False |
max_cache_size | The number of bytes after which the shared cache will start a collection | No | Integer | Yes | Yes | 25GB |
low_cache_size | The number of bytes that the cache tries to reach during a collection | No | Integer | Yes | Yes | 15 GB |
Below is a full example
// .wakeroot
{
"version": "0.31.0",
"user_config": "~/.config/wake.myrepo.json"
}
// ~/.config/wake.myrepo.json
{
// Right now there are no implemented user keys so this file is always empty
// This will be updated once log verbosity or another user key is implemented
}
Documentation for wake can be found in share/doc/wake.
- Try the Tutorial for a step-by-step introduction.
- The Quick Reference Guide is handy overview of wake syntax in cheat-sheet form.
- The Annotated Source Code of wake can be useful when trying to understand the standard library.
- The sphinx-generated reference manual