jimjiang2's repositories
ch341dll_wrap_typical_app
A ch341dll Wrap is for using in Python 32bits windows to access I2C SPI and MDIO (by GPIO), and Demo with display PC sreen on OLED by i2c or SPI .
ch341dll_octave_wrap
Ch341dll wrap for Octave to access I2C SPI and GPIO on Windows. And a demo to drive a I2C elod(0.9 inch).
octave_visa32_wrap_windows
NI visa32.dll (lib) Wrap for octave on windows10 for instrument control .
8051-examples
基于SDCC编译器的8051单片机示例
catapult-microsoft-pcie
Documenting the Catapult v3 SmartNIC FPGA boards (Dragontails Peak & Longs Peak)
RTLSDR-Scanner
A cross platform Python frequency scanning GUI for the OsmoSDR rtl-sdr library
3D-Wizard-World
Resources of 3D Wizard Projects
cnfatal.github.io
Personal blog site.
Computer_Vision_Projects-1_Document_Scanner
This repository is dedicated to a real-life computer vision application with OpenCV. Precisely, building a Python application for document scanning using a series of morphological transformations.
edgeboard
Make Baidu EdgeBoard Lite as a general Zynq FPGA development board
Fixate
Framework for hardware test fixtures and automatic test environments
FPGA_IO_FOUNDER
This project is the location of the FPGA io output with the UART serial port. Used to confirm the GPIO binding relationship of the FPGA. It is especially suitable for some FPGA boards that need to be reversed.
iptvutils
IPTV utilities for recording, playing and converting MPEG TS over IP
libmirisdr-4
Support of Mirics MSi001 + MSi2500 SDR devices
OpenFPGA
An Open-source FPGA IP Generator
PyDSA
Spectrum Analyzer for the Rigol DS1000 series oscilloscopes
PynqRadio
Skeletal repository for GNU Radio WBFM implementation on Pynq board
Python-GUI-Programming-with-Tkinter
Python GUI Programming with Tkinter, published by Packt
r820t2
Breakout PCB design and STM32F0 firmware for the Rafael R820T2 tuner chip
radioconda
Software radio distribution and installer for conda
sdr_receiver_dvb_t2
This is a Software Defined Radio(SDR) project implementing a DVB-T2 receiver.
zhihu
我的知乎内容