LIVW-Localization

A Multi-modal Information Fused Vehicle Localization method for Complex, Large-Scale and GNSS-Denied Environments.

1. Introduction

Accurate and robust vehicle localization is a key issue in autonomous driving. However, traditional vehicle localization methods usually have issues such as excessive reliance on GNSS, low localization accuracy and poor robustness to sensor degradation environments, etc. To solve the above problems, we propose a map-based vehicle localization method that fuses LiDAR, vision, IMU and wheel encoder, named LIVW-Localization. To fully utilize the complementary advantages of LiDAR and vision, we use pre-built LiDAR map and real-time visual patches to construct a local visual map. To extract more stable and high-quality visual feature points, we propose a method to reuse the nearest neighbor points retrieved from real-time LiDAR scan in a point cloud map as the initial selecting criteria for visual feature points. Moreover, we propose an efficient method to fuse a single wheel encoder to improve the vehicle localization accuracy. To validate the performance of the proposed method, qualitative and quantitative experiments are conducted in various complex scenes, such as tunnels, long corridor-like outdoor environments and highways. Experimental results show that our method outperforms the state-of-the-art methods, and the root mean square errors (RMSE) of translation and rotation are 0.395m and 0.007rad respectively in the 19.376km highway LHW-2 dataset. The implementation code of this paper is open-source on Github.

2. Prerequisited

2.1 Ubuntu and ROS

Ubuntu 20.04
ROS-Noetic

2.2 PCL && Eigen && OpenCV

PCL = 1.10.0, Follow PCL Installation.

Eigen=3.3.7, Follow Eigen Installation.

OpenCV=4.2.0, Follow Opencv Installation.

2.3 Sophus

Sophus Installation for the non-templated/double-only version.

git clone https://github.com/strasdat/Sophus.git
cd Sophus
git checkout a621ff
mkdir build && cd build && cmake ..
make
sudo make install

2.4 Vikit

Vikit contains camera models, some math and interpolation functions that we need. Vikit is a catkin project, therefore, download it into your catkin workspace source folder.

cd ~/catkin_ws/src
git clone https://github.com/uzh-rpg/rpg_vikit.git

3. Build

Clone the repository and catkin_make:

cd ~/catkin_ws/src
git clone https://github.com/jibowang26/LIVW-Localization
cd ../
catkin_make
source ~/catkin_ws/devel/setup.bash

jibowang26 / LIVW-Localization