jhnc-oss / yocto-build

Yocto Build Container Environment using podman(1)

Yocto Build Container Environment using podman(1)

Prerequisites

Ensure that you have installed the following prerequisites on your host machine:

• containerd
• podman

Should permission problems occure with the file mappings /etc/subuid and /etc/subgid have to be edited.

Bootstrapping the Yocto Build Container

Run the following commands to set up the build container environment:

$ git clone https://github.com/jhnc-oss/yocto-build.git
$ cd yocto-build
$ ./dev/bootstrap.sh

  — or:
$ ./dev/bootstrap.sh <manifest branch>

Layer manifest main is used by default, use dev/bootstrap.sh <Manifest Branch> to select another one.

Known Issues

There are known issues running the build container on systems with enabled SELinux in Enforcing mode. If you get permission errors try to set SELinux mode to permissive by running:

sudo setenforce 0

You may face further issues with SELinux being enabled during builds resulting in errors such as:

Command 'cp -afl --preserve=xattr ...' failed

As the podman container runs unprivileged (rootless) the cause might be container-storage setting driver to "overlay" by default. Try switching to "vfs" using the following user-specific configuration snippet:

mkdir -p ~/.config/containers
cat > ~/.config/containers/storage.conf <<EOF
[storage]
driver = "vfs"
EOF

After changing the driver setting when running podman you may face errors such as:

ERRO[0000] User-selected graph driver "vfs" overwritten by graph driver "overlay" from database - delete libpod local files to resolve

In this case, you have to reset your database, e.g. by running:

(sudo) rm -rf ~/.local/share/containers

For further details please refer to containers-storage.conf(5).

Available Versions

Yocto Release Branch	Status	Note
kirkstone	✔️ LTS	🔃 Synced from main — do not contribute directly
dunfell	✔️ LTS