jessiebryan / lenovo-sa120-fanspeed-utility

lenovo-sa120-fanspeed-utility

This is currently in prototype status.

Requirements

Requires Python and the sg_ses utility, provided by the sg3_utils package.

Debian-based systems might use:

# apt-get install sg3-utils

On RHEL/CentOS systems:

# yum install sg3_utils

FreeNAS 9.10 includes sg_ses as part of the standard image.

Usage

Find the SCSI Enclosure Services device corresponding to your SA120. On Linux, this is likely one of the /dev/sg* devices. (Try lsscsi?) On FreeBSD, this is likely /dev/ses* instead.

You can use sg_ses to identify SES devices, e.g.:

# sg_ses /dev/ses0
  LSI CORP  SAS2X28           0717
…
# sg_ses /dev/ses1
  LENOVO    ThinkServerSA120  1007
…

Once you've found your SA120, use fancontrol.py to set the fan speed:

# python fancontrol.py /dev/sg0 2
Fan 0 speed: 0
Fan 1 speed: 947
Fan 2 speed: 932
Fan 3 speed: 812
Fan 4 speed: 932
Fan 5 speed: 947
Reading current configuration...
Setting fan 0 to 2
Setting fan 1 to 2
Setting fan 2 to 2
Setting fan 3 to 2
Setting fan 4 to 2
Setting fan 5 to 2
  LENOVO    ThinkServerSA120  1007
Sending Enclosure Control [0x2] page, with page length=296 bytes

Fan 0 speed: 0
Fan 1 speed: 945
Fan 2 speed: 932
Fan 3 speed: 812
Fan 4 speed: 926
Fan 5 speed: 945