= ruby-scgi
ruby-scgi is a Ruby library for running Ruby on Rails (and possibly other
web applications) for high-speed deployment of your applications in production.
It is intended as a replacement for the ancient FastCGI code base and bring
some big advantages to Rails deployment for production operations.
SCGI (Simple Common Gateway Interface) is a project to replace CGI and FastCGI
with a simpler protocol to both implement and manage. It was written by Neil
Schemenauer and adopted by many Python developers as a hosting option.
ruby-scgi is distributed as a gem, and can be installed with:
sudo gem install scgi
Feedback/Bugs/Support Requests should be handled through RubyForge at
http://rubyforge.org/projects/scgi/.
The RDoc is available at http://scgi.rubyforge.org
Source control access is available at github
(http://github.com/jeremyevans/ruby-scgi).
== Advantages
* Same performance as FastCGI and better performance than other methods.
* Can be used to run Rails with style (sudo gem install style)
* Gives out limited status information to help manage your application's
resources.
* You can set a maximum concurrent connections limit, which causes any
connections over the limit to get redirected to a /busy.html file. This can
help keep your site alive under heavy load.
* Simple to configure with your web server.
* Completely free code licensed under Rails's own license.
* No external dependencies other than Ruby
== Comparison With FastCGI
SCGI and FastCGI have similar goals: To keep Ruby running between requests and
process the requests as fast as possible. The difference is that SCGI is much
simpler and easier to implement so there's less chance to get it wrong.
Specifically, ruby-scgi is written in pure Ruby so it doesn't leak memory,
runs everywhere, and is easy to install (no compilers needed).
One thing that SCGI doesn't support is using UNIX Domain sockets in addition to
TCP/IP sockets. This isn't really needed, but it is handy in a shared hosting
situation where you don't want others connecting to your processes or if you
have to request open ports. Sorry, no UNIX Domain sockets in SCGI.
== Comparison With WEBrick
In theory WEBrick should be able to run just as fast as ruby-scgi. They are
both written in pure Ruby. They both do similar processing (although WEBrick's
are a little more complicated). They both return about the same amount of
data.
In practice WEBrick in production mode runs much slower than ruby-scgi in
production mode. The (dis)advantage (depending on your point of view) is that
you have to manage your webserver differently than you manage your application.
== Comparison With CGI
CGI is where every time a request comes in for rails the whole Ruby on Rails
framework is loaded. This is very slow, but it's easy to install.
An alternative is to use the cgi2scgi program distributed with the SCGI source
available from http://www.mems-exchange.org/software/scgi/ along with the
Apache modules. This program basically is a small little C program that runs
quickly as a CGI, but passes it's requests to your ruby-scgi backend. It's not
all that fast, but if you're stuck with cgi-bin only access then this might be
just the way to go. Since SCGI runs over TCP/IP you can even host your
ruby-scgi on a totally different machine with this.
== Running and Configuration
ruby-scgi is now just a library and doesn't come with a tool to run Rails. The
previous command line tool (scgi_ctrl) has been greatly enhanced and is now
available as a standalone gem called ruby-style.
== Example configurations
Note that ruby-scgi is only tested on Lighttpd. Also, note that Lighttpd
1.4.16 has a bug which breaks redirects using server.error-handler-404, so
either use mod_magnet, use 1.4.18, or apply the patch in ticket 1270 on
Lighttpd's Trac.
Lighttpd:
server.modules = ( ... "mod_scgi" ... )
server.error-handler-404 = "/dispatch.scgi"
# For Single Process or Single-Port Clustering
scgi.server = ( "dispatch.scgi" => (
"server1" => (
"host" => "127.0.0.1",
"port" => 9999,
"check-local" => "disable",
"disable-time" => 0)
))
# For Multi-Port Clustering
scgi.server = ( "dispatch.scgi" => (
"server1" => (
"host" => "127.0.0.1",
"port" => 9997,
"check-local" => "disable",
"disable-time" => 0),
"server2" => (
"host" => "127.0.0.1",
"port" => 9998,
"check-local" => "disable",
"disable-time" => 0),
"server3" => (
"host" => "127.0.0.1",
"port" => 9999,
"check-local" => "disable",
"disable-time" => 0)
))
Apache:
<VirtualHost your-ip:80>
AddDefaultCharset utf-8
ServerName www.yourdomain
DocumentRoot /your-switchtower-root/current/public
ErrorDocument 500 /500.html
ErrorDocument 404 /404.html
# handle all requests throug SCGI
SCGIMount / 127.0.0.1:9999
# matches locations with a dot following at least one more characters,
# that is, things like *,html, *.css, *.js, which should be delivered
# directly from the filesystem
<LocationMatch \..+$>
# don't handle those with SCGI
SCGIHandler Off
</LocationMatch>
<Directory /your-switchtower-root/current/public/>
Options +FollowSymLinks
Order allow,deny
allow from all
</Directory>
</VirtualHost>
== Changes from version 0.9.0
* The library should now run on Windows, though there may be issues shutting
it down.
== Changes from version 0.8.0
* You can pass a socket to SCGI::Processor.new via settings[:socket]
* You can have a socket created for you in new if you pass
settings[:host] and settings[:port]
* You can pass an existing logger to new via settings[:log]
* Passing a socket to listen is now optional, if you passed a socket or
had one created in new
* Improved RDoc for new
* Most SCGI::Processor methods are now private
* SCGI::Processor is easier to subclass because it will use preexisting
instance variables
== Changes from version 0.7.0
* Command line tool is now in a seperate gem called ruby-style
* You now must pass a socket to SCGI::Processor#listen
* SCGI::Processor's @log and @maxconns now have defaults
* SCGI::Processor's @host and @port are no longer used
== Changes from SCGI Rails Runner by Zed Shaw
* Single-port clustering is back
* scgi_ctrl is fully configurable on the command line
* Clustering and processing are now built into scgi_ctrl
* DRb, Win32, and throttling are no longer supported
* Soft reconfiguration has changed (no SIGUSR1)
* Restarting via SIGHUP is only supported in supervise mode
* The only commands available to scgi_ctrl are start, stop, and restart
== FAQ
Q: Have you been living under a rock for the last two years? Mongrel/Nginx is
the new hotness!
A: Well, aren't you snotty. You can certainly use Mongrel if you want. The
memory/performance differences are small, and it is probably better maintained.
ruby-scgi is a simpler version of SCGI Rails Runner, and may be useful for
certain legacy setups. Also, it works well and it's been working for me for
the last few years.