jeonghanlee / e3-builder

E3 Building Environment : e3-builder with >>>

e3-builder

European Spallation EPICS Environment (E3) [1] Deployment, works with e3-mainfest [2]

Preparation

One needs to setup Repo as follows:

$ mkdir -p ~/bin
$ export PATH=~/bin:$PATH
$ curl https://storage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
$ chmod a+x ~/bin/repo

Procedure

Step 1: Create a directory

$ mkdir e3_env
$ cd e3_env

Step 2: Init

• Initialize epics_env to use the default.xml [4] on the master branch

e3_env $ repo init -u https://github.com/icshwi/e3-manifest

Step 3: Sync

e3_env $ repo sync --no-clone-bundle

Step 4: Build

e3_env $ bash pkg.bash
e3_env $ make base
e3_env $ make require
e3_env $ make common
e3_env $ make timing
e3_env $ make v4

Step 5: Set the E3

e3_env $ source 000.setE3Env.bash 

E3 Extensions

Before installing the following module group, one should install all necessary things (base, require, common, v4, kernel modules, and so on).

Extra

e3_env $ make extra

AreaDetector

e3_env $ make areaDetector

IOxOS

e3_env $ make ioxos0

In order to execute the following commands, it is the mandatory that users can access the ESS bitbucket, gitlab, or both repositories within the ESS network. Most of users do NOT need them.

e3_env $ make ioxos1

Ethercat (Motion)

Before it, one should do platform/ethercat first. Please follow the README.md in the reference [6]. One should access the ESS bitbucket repository. Please check the reference [5].

e3_env $ make ethercat

LLRF Applications

Before it, one should install the LLRF SIS8300 kernel driver. One should access the ESS bitbucket, gitlab, or both repositories. Please check the reference [5].

e3_env $ make llrf

BI Applications

Before it, one should install the BI SIS8300 kernel driver. One should access the ESS bitbucket, gitlab, or both repositories. Please check the reference [5].

e3_env $ make bi

Platform Path

In the directory, one can find the following additional tools which allow users to install few more enviornment or libraries. For further information, please look at corresponding urls:

ethercat

• https://github.com/icshwi/etherlabmaster

lmfit

• https://github.com/jeonghanlee/lmfit-env

opencv

• https://github.com/jeonghanlee/opencv-env

nioc

• https://github.com/jeonghanlee/epics_NIOCs

Additional commands

• Initialize epics_env to use the epics_180811.xml, on the master branch

repo init -u https://github.com/icshwi/e3-manifest -m e3-180801.xml

• Force Sync

repo sync --force-sync --no-clone-bundle

References and comments

(1) https://github.com/icshwi/e3
(2) https://github.com/icshwi/e3-manifest
(3) https://gerrit.googlesource.com/git-repo/
(4) https://raw.githubusercontent.com/icshwi/e3-manifest/master/default.xml
(5) https://raw.githubusercontent.com/icshwi/e3/master/tools/use_sshkey.sh
(6) https://github.com/icshwi/etherlabmaster