Escapade's repositories
NMEA2000WifiGateway-with-ESP32
This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.
venus-chargerybms
Driver to embed the Chargery BMS to a Venus OS device
NMEA2000
NMEA2000 library for Arduino
CAN_BUS_Shield
CAN Bus Shield - MCP2515&MCP2551
NMEA2000_mcp
Inherited object for use NMEA2000 library for Arduino Boards with MCP2515 CAN bus controller.
canboat
CAN Boat provides NMEA 2000 and NMEA 0183 utilities. It contains a NMEA 2000 PGN decoder, can read and write N2K messages.
RV-C
Support lib for NMEA2000 (Timmo) to add RV-C PGNs
NMEA0183
Library for handling NMEA0183 messages
NMEA2000_socketCAN
A driver for the NMEA2000 library and standard linux socketCAN devices
NMEA2000_esp32
Inherited object for use NMEA2000 with ESP32 boards
due_can
Object oriented canbus library for Arduino Due compatible boards
avr_can
Object oriented canbus library for Atmel AVR CPUs used with the Arduino IDE.
OpenSkipper
OpenSkipper provides Open Source C# code for Windows for integrating and displaying NMEA 0183, NMEA 2000 and AIS data from nautical instruments, GPS units and internet data sources. OpenSkipper can be run on a laptop aboard your boat to show electronic instruments displaying speed, heading, etc. OpenSkipper can also receive and transmit data over multiple connections, including a serial port (for NMEA 0183), an ActiSense NGT-1-USB NMEA-2000-to-USB converter to read NMEA 2000 (N2K) data, and wired and wireless network connections (including TCP and UDP). It also contains a built-in webserver, so you can run OpenSkipper on a laptop and use this to display data on an iPad or Android phone or tablet.
VEcan
Communicating with Victron energy products, also compatible with other inverters and solar equipement
NMEA2000_due
Inherited object for use NMEA2000 library for Arduino Due Boards
NMEA2000_avr
A driver for the NMEA2000 Arduino library and Atmel CAN enabled AVR CPUs
Lean
Lean Algorithmic Trading Engine by QuantConnect (C#, Python, F#, VB, Java)
ta-lib
mirror to serve my projects as dependency