This module provides control of a Sensbo Pure air purifier from a Crestron 3-Series or 4-Series Processor.
The first step in using this module is to obtain an API Key. To accomplish this you will need to use your username/password and login to the Sensibo web site. There is a login link in the menu at the bottom of the main page of the web site. You will then be presented with a screen that shows you your Sensibo devices. In the upper left hand corner of the screen is a menu icon and selecting it will present you with an option to create an API Key.
Next you will need to obtain the ID of your Sensibo Pure. In the lower right corner of the square that represents you Sensibo Pure when you are logged in on the Sensibo web site is a 3 dot menu icon. Pressing this displays a drop down menu. Press the "Advanced" option on the menu and then choose "Advanced Info". The UID is the device ID of your Sensibo Pure.
Copy the API Key and the UID into the API_Key and Device_ID paramters of this module.
Inputs Initialize - Must be pulsed to initilize communications Refresh - Will referesh the status of feedback signals. Shouldn't be needed unless someone controls the Sensibo Pure using the buttons on the device or the app. Purifier_On/Off - Pulse to turn purifer on or off Light_On/Dim/Off - Pulse to control the Purifier's light PureBoost_On/Off - Pulse to turn Pure Boost on/off Fan_Low/High - Pulse to control the fan speed
Outputs Purifier_FB - Power status of purifier LightFB - Status of the purifier's light PureBoostFB - On/Off status of Pure Boost Mode Fan_FB - Fan speed status PM25 - 1 = Good Air Quality, 2 = Moderate Air Quality, and 3 = Unhealthy Air Quality
Parameters Device_ID - UID of device to be controlled obtained from the Sensibo web site API_Key - API Key from Sensibo web site Debug_Msg_Output - Where to send debug messages 0=None, 1=Console, 2=Error Log, 3=Both