Determining the health of your network is often based on a central NMS hosted on your virtualization platform of your, be it on-prem or in the cloud, doing snmp and/or icmp based polling of your network devices.
To some extent, this may be fine. But in a scenario where you virtualization platform is experiencing problems, the metrics on your NMS may be affected. Or say you have a switch or router that is silently discarding packets, yet it reports no problems to you NMS. Tracking down the problem will be difficult if these data are all you have to go by.
This project aims to provide an inexpensive method for doing real time network performance analytics - as seen from the user.
It utilizes the raspberry pi as a "sensor" that you can deploy to any part of your network, where it will collect ping and/or curl metrics towards hosts defined in the config.
The config file can be hot-loaded from a URL into your fleet of sensors by setting the config variable "use_remote_config":"true".
This means you will be able to do on the fly troubleshooting, to any given host, in just a couple of minutes - using real time data provided by your sensor network.
You will get detailed metrics in the form of:
- ICMP packet loss including exact timestamp of when and where it happened
- ICMP RTT metrics including timestamps
- Traceroute to targets defined in the config every 5 minutes - always nifty when troubleshooting
- cURL metrics with http status code, time taken, dns lookup time and much more
All logging is done in JSON - which means logstash will import the data without any GROK filtering
A concept drawing of how it works
An ELK dashboard with data
- Raspberry Pi 3 or 4
- Ubuntu 20.04 32/64-bit for raspberry pi - https://ubuntu.com/download/raspberry-pi
- ELK stack for visualization
You can either download our pre-build image and write it to your SD card, or you can run the included installer.
cd /opt
sudo git clone https://github.com/jandahl/rnm-sensor.git
cd rnm-sensor
sudo ./install.sh
The install script does the following
- Installs required packages in order to run rnm-sensor (
libssl-dev,autoconf,libtool,make,unzip,python3-pip,net-tools, andjc) - Updates curl to the latest version (which supports json write-out logging)
- Creates tmpfs for
/tmp,/var/log, and/var/tmpin order to minimize SD card wear and tear - Adds a systemd service called
rnm-sensor.service - Installs the filebeat log shipper and copies filebeat-template.yml
⚠️ remember to set your logstash host in /etc/filebeat/filebeat.yml⚠️ - Sets the MAC address of the RPi as the hostname. This enables a single SD card to be cloned for mass deployments, while being able to easily identify each RPi within the network