jakkra / ZSWatch-Dock

The dock hardware for ZSWatch

jakkra/ZSWatch-Dock Issues

Update link for STM32 datasheet
Closed 4 months ago
Update KiBot configuration
Closed 4 months ago
Remove STATUS LED in minimal variant
Closed 4 months ago
Change power supply for CHARGE LED to VBUS
Closed 4 months ago
Add debounce capacitor to SEL-Switch
Closed 4 months ago
Add note for setting SEL to high per default to support rev <5
Closed 4 months ago
Wrong direction for SWDCLK_WATCH in Schematics
Closed 4 months ago
Add J-Link OB Documentation
Closed 4 months ago
Dock casing
Updated 4 months ago2
VTarget on the STM32 SWD interface must be switched when using variant with external J-Link
Closed 4 months ago
Remove 3.3 V regulator in minimal variant.
Closed 4 months ago
Add USB data connection as second USB interface
Closed 4 months ago
Add KiBot configuration
Closed 4 months ago
Replace 4-pol DIP switch with another solution for switching between USB and SWD
Closed 4 months ago1
Make labels look nicer
Closed 4 months ago
Add jumper to disable power supply (useful to switch between battery and stationary power)
Closed 4 months ago1
Add project URL as QR code
Closed 4 months ago1
Question about STM32_TxD and STM32_RxD in Reset-Config
Closed 8 months ago2