This repository is mainly of historical interest. It contains sample documents from the time the 2Immerse project was still actively being developed. Therefore, some (or all) of these samples may or may not work with the open source 2-Immerse repositories from https://github.com/2-IMMERSE. You have been warned.
This repository contains sample 2immerse experiences. The samples are technical, i.e. they are intended to test features of the implementation, not to show off the platform to third parties.
If you point your browser to indexx.html you should be able to select the test you want to see (provided you are doing so with Chrome or another 2immerse-compatible browser). And it has a double-x in the name so you can still browser to this directory on the origin server and see the contents:-).
- Pick a new number, create a folder, put a timeline.xml and layout.json in there.
- Add to indexx.html
- Add to indexx_edge.html
- Add to client.json
- Check syntax on the local files (see below)
- Upload (see below)
- Check syntax and media items (see below)
After changing anything here you need to upload the changed files using
make install
For this to work you need to have the AWS client installed:
sudo pip install awscli
Then you need to enter the credentials to allow you to upload:
aws configure
Enter the credentials that James shared in an email from 20-Feb-2017 with subject Uploads to new platform.
To run a syntax check of all layout and timeline documents run
make test
and to check the syntax and also existence of media for installed documents run
make livetest
You can also test individual documents by using targets like test-100-video-mp4.