- 1 - Repository Configurtion
- 2 - Add Repo Signing Key
- 3 - Sync Package Database
- 4 - Install Skywire
- 5 - Configure Additional Visors
- 6 - Updating Your System And The Skywire Installation
- Manual Download / instalation and Instructions for users in China - **境内用户使用说明
This Repository acts as a debian package repository which can be used to install skywire on .deb based systems These packages are updated as new upstream versions are released.
Users are encouraged to configure this package repository in their APT sources in order to have access to updated versions of the software packages in this repo.
ALL COMMANDS SHOULD BE RUN AS ROOT OR WITH SUDO
(as root or use sudo):
add-apt-repository 'deb http://the-skycoin-project.github.io/deb sid main'
If add-apt-repository is not be available, install it with apt install software-properties-common
or just manually edit your /etc/apt/sources.list (as root or use sudo):
nano /etc/apt/sources.list
Add the following:
deb http://the-skycoin-project.github.io/deb sid main
#deb-src http://the-skycoin-project.github.io/deb sid main
as root:
curl -L http://the-skycoin-project.github.io/deb/KEY.asc | apt-key add -
with sudo this would be:
curl -L http://the-skycoin-project.github.io/deb/KEY.asc | sudo apt-key add -
(as root or use sudo)
apt update
(as root or use sudo)
apt install skywire-bin
provided is the packaged binary release of skywire, latest version
At the point you have completed the above, skywire should be running. The output of the package installation should provide a link to the hypervisor UI where you an check it in your web browser.
If you have difficulty with configuring this repository, you may attempt manually downloading and installing the package
the following script included with the package accepts one argument - the remote hypervisor key
skywire-hypervisorkey <remote-hypervisor-key>
remember to substituite a public key in the command above
PLEASE DO NOT USE THE UPDATE BUTTON IN THE SKYWIRE UI
Any new version of packages which are added to repositories you have configured in your apt sources will be installed with the following commands (as root or use sudo):
apt update
apt upgrade
Additionally, refer to the notes on the current skywire release at the beginning of this document for details on any manual intervention which is necessary for updates to work. And remember:
PLEASE DO NOT USE THE UPDATE BUTTON IN THE SKYWIRE UI
the armv6 architecture code on debian is the same one used for armv7, until this conflict can be resolved, the release for armv6 architecture is included in the release section of this repository at the given link:
https://github.com/the-skycoin-project/deb/releases/download/archive/skywire-bin-armv6-0.4.1-5-armhf.deb and can be installed manually as follows:
wget -O skywire-bin-armv6-0.4.1-5-armhf.deb https://github.com/the-skycoin-project/deb/releases/download/archive/skywire-bin-armv6-0.4.1-5-armhf.deb
dpkg -i skywire-bin-armv6-0.4.1-5-armhf.deb
NOTE: THE PACKAGE REPOSITORY DOES NOT WORK IN CHINA
注意：包裹存放区在**不起作用
Current versions of skycoin packages for ARMHF, ARM64, AMD64 are available via the repository. All versions are available for direct download in the release section
Users inside China can download and install the package like this:
( **境内的用户可以像这样下载并安装软件包 )
( 从下面的选项中选择与目标计算机的体系结构相对应的软件包的适当体系结构。 从您要在其上安装skywire的计算机的SSH会话或终端中执行以下命令 )
用于橙色pi ARM64 For ARM64 https://github.com/the-skycoin-project/deb/releases/download/archive/skywire-bin_0.4.1-5_arm64.deb
wget -O skywire_0.4.1-5_arm64.deb https://github.com/the-skycoin-project/deb/releases/download/archive/skywire-bin_0.4.1-5_arm64.deb
dpkg -i skywire_0.4.1-5_arm64.deb
用于树莓派ARMHF For ARMHF https://github.com/the-skycoin-project/deb/releases/download/archive/skywire-bin_0.4.1-5_armhf.deb
wget -O skywire-bin_0.4.1-5_armhf.deb https://github.com/the-skycoin-project/deb/releases/download/archive/skywire-bin_0.4.1-5_armhf.deb
dpkg -i skywire-bin_0.4.1-5_armhf.deb
用于台式机AMD64 For AMD64 https://github.com/the-skycoin-project/deb/releases/download/archive/skywire-bin_0.4.1-5_amd64.deb
wget -O skywire-bin_0.4.1-5_amd64.deb https://github.com/the-skycoin-project/deb/releases/download/archive/skywire-bin_0.4.1-5_amd64.deb
dpkg -i skywire-bin_0.4.1-5_amd64.deb
用于树莓派ARMHF - armv6 raspberry pi zero https://github.com/the-skycoin-project/deb/releases/download/archive/skywire-bin-armv6-0.4.1-5-armhf.deb
wget -O skywire-bin-armv6-0.4.1-5-armhf.deb https://github.com/the-skycoin-project/deb/releases/download/archive/skywire-bin-armv6-0.4.1-5-armhf.deb
dpkg -i skywire-bin-armv6-0.4.1-5-armhf.deb
If you recieve an error about missing dependancies, try using the --ignore-depends flag with dpkg
( 如果收到关于缺少依赖项的错误，请尝试在dpkg中使用--ignore-depends标志 )
Remember, you will not have access to automatic updates
( 请记住，您将无权访问自动更新 )