pyhusmow

Control your Husqvarna automower using Automower connect API.

Requirements

python 3
requests

Commands

Read status of your automower

python husmow.py --login yourmaillogin --password yourpassword status

Start your automower

python husmow.py --login yourmaillogin --password yourpassword control START

Stop your automower

python husmow.py --login yourmaillogin --password yourpassword control STOP

Park your automower

python husmow.py --login yourmaillogin --password yourpassword control PARK

Run HTTP server

You can run a tiny webserver to command your automower using HTTP commands (can be useful for home automation boxes...):

python husmow.py --login yourmaillogin --password yourpassword server

Then you can use GET requests to:

start your automower: http://127.0.0.1:1234/start
stop your automower: http://127.0.0.1:1234/stop
park your automower: http://127.0.0.1:1234/park
get the status of your automower: http://127.0.0.1:1234/status returns status as json in the response body

All of these HTTP requests return 200 if the command was successfully sent to Husqvarna server and 500 in case of problem.

You can change the IP address or port using options --address and --port but you shouldn't open this server outside of you local network because this tiny server is not designed to be as secure as common web server.

python husmow.py --login yourmaillogin --password yourpassword server --address 0.0.0.0 --port 2345

To avoid sending too much status requests to Husqvarna server, status is not refreshed before 30 seconds (can be configured using --expire option in seconds).

Save configuration in configuration file

You can save login, password, output_format, log_level in automower.cfg in the directory where you run this script to omit these information from the command line for the next run.

To save information, just type your command with all information and add the option --save to command line:

python husmow.py --login yourmaillogin --password yourpassword --log-level INFO --save control PARK

And the next time you run the command, you can omit these information from the command line:

python husmow.py control PARK

The file 'automower.cfg' is created in the current directory where you run the script and THE PASSWORD IS STORED IN PLAIN TEXT.

Warning

The API and command line are not stable and can change at any time.

Contributors

rost314 (@rost314)

Special Thanks

I thank moumou for mowing my lawn very well !

irudi / pyhusmow