Stephen Moraco's repositories
RPi-Reporter-MQTT2HA-Daemon
Linux service to collect and transfer Raspberry Pi data via MQTT to Home Assistant (for RPi Monitoring)
lovelace-rpi-monitor-card
A Raspberry Pi status display Card for Home Assistant Lovelace
ISPLowEnergyManager
A pattern for Bluetooth Low Energy Applications - with Demos
lightning-detector-MQTT2HA-Daemon
Linux script to monitor AS3935 lightning detector and report detections to MQTT
lovelace-lightning-detector-card
A Lightning Detection Display Card for Home Assistant Lovelace
P2-HUB75-LED-Matrix-Driver
A driver for HUB75E RGB LED Matrix Panels driven from the Parallax Propeller V2
P2-BLDC-Motor-Control
Single and Two-wheel driver objects P2 Spin2/Pasm2 for our 6.5" Hub Motors with Universal Motor Driver Board
P2-LED-Matrix-Morphing-Digits
A nod to the HariFun #165 video but implemented using table driven animations with the table generated by python using "segment adjacency" along with "segment on/off changes from digit to digit."
P2-vscode-extensions
VSCode support for SPIN/PASM for Propeller V1 and V2
DigiAnaFun
Digital Clock made up of Analog Clock faces - iPhone
P2-FLASH-FS
Chip's Flash FS with a standard API for accessing the FLASH chip on the P2 Edge Module.
RPi-LED-Strings
RPi Linux Application and LKM for driving three WS2812B panels via GPIO
Omega2-Reporter-MQTT2HA-Daemon
Linux service to collect and transfer Onion Omega device data via MQTT to Home Assistant (for Omega Monitoring)
P2-LED-Matrix-Liquid-Binary-Digits
Visually combining fluid, binary digits on an RGB LED Matrix panel
P2-OctoSerial-subsystem
A Parallax Propeller V2 Object Set for maintaining eight simultaneous serial ports
P2-Panel-Light-Measure
Demo project using BH1750s to measure HUB75 Panel output - running on the Parallax P2 Processor
P2-vscode-langserv-extension
Spin/Spin2 Language Server based vscode extension
awesome-home-assistant
A curated list of amazingly awesome Home Assistant resources.
contributing
How to make a clean pull request on Github
P2-Click-eInk
Driving the Mikroe eInk Click with our P2
P2-click-MPU-9dof
Interface library to MPU 9DOF Click module from Parallax Propeller V2
P2-Click-UWB
Propeller 2 Object for interaction with the Mikroe UWB Click Module with Demo
P2-DUAL-FS-FLASH-N-SD
The future home of our combined Flash and uSD filesystem for simultaneous use of the FLASH chip and the uSD card on a P2 Edge Module.
P2-mult-servo-exerciser
Exercise/Characterize Multiple servos connected via PCA9685 PWM controller
P2-PCA9685-Servo-Driver
P2 Object for I2C 16-chan Servo Driver with 6-axis arm control demo
P2-RPi-IoT-gateway
Enable an RPi to serve as an IoT gateway for our P2 Hardware - requiring only minimal P2 footprint (pins, code-space, etc.)
P2-VL53L5CX-time-of-flight-driver
P2 Object for interacting with the VL53L5CX Time-of-Flight Sensor
RPi-LED-Matrix-MQTT-Clock
An RPi based MQTT controlled 40x10 P4 led matrix display for Clock/Weather, etc.
RPi-P2D2-Support
Useful information for using P2D2 (parallax Propeller V2) with Raspberry Pi