๐ Pollinator is a super lightweight library for lazy people to poll any function (API gateway anyone?). Supports retries, pausing, cancelling, emits events you can subscribe to. It has a nice, natural API and works in Node and browsers.
Main features
- simple API ๐จ
- start, pause and stop at any time ๐ฎ
- add event listeners to receive polling results and polling status changes ๐ญ
- written in TypeScript ๐ทโโ๏ธ
- cancel polling when certain conditions are met based on current or previous results ๐
- supports sync and async functions ๐
- configurable delay between polling โฒ
- configurable retry attempts in case of error ๐
- well tested, no unnecessary calls โฐ
- no bs - does only one thing and gets the job done ๐๐ป
Installation
For node just do your:
yarn add pollinator
#or
npm install pollinator
For the browsers add the CDN link:
<!-- either use unpkg.com -->
<script src="https://unpkg.com/pollinator@0.3.2/dist/index.umd.min.js"></script>
<!-- or use JSDelivr -->
<script src="https://cdn.jsdelivr.net/npm/pollinator@0.3.2/dist/index.umd.min.js"></script>
Usage
Here's a minimal example
// es6
import Pollinator from 'pollinator'
function pollingFunction() {
return fetch('http://some-url.com/endpoint')
}
// configure your poller
const poller = new Pollinator(pollingFunction)
// remember to start
poller.start()
This will poll pollingFunction
indefinitely.
To get the return from the polling function you need subscribe to an event.
poller.on(Pollinator.Event.POLL, handlePoll)
function handlePoll(response, status) {
// do something with the response and current polling status
console.log('The response is:', response)
console.log('Current polling status is:', status)
}
Say you want to stop polling when a specific response comes back from the polling function.
const poller = new Pollinator(pollingFunction, {
conditionFn: stopPollingOnCondition,
})
function stopPollingOnCondition(currentResponse, previousResponse) {
// return true if you wish to stop polling
if (currentResponse === 'Half a Bee' && previousResponse === 'Eric')
return true
// return false if you don't want to stop and keep on polling
return false
}
Reference
Pollinator
constructor params
Name | Type | Required | Description | Default |
---|---|---|---|---|
pollFn | function |
required |
A function you want to poll. Can be sync or async. | |
config | PollinatorConfig |
optional |
Optional configuration. Check details below | see PollinatorConfig type below |
PollinatorConfig
type
Name | Type | Required | Description | Default |
---|---|---|---|---|
polFnParams | unknown |
optional |
Use this option to pass some parameters to the pollFn |
undefined |
conditionFn | function |
optional |
Use this function to stop polling. The function will be called with two parameters of current and previous response from the pollFn . Must return a boolean where true stops polling.(current: unkown, previous: unkown) => bool |
() => false |
delay | number |
optional |
A value in milliseconds setting the timeout between consequent pollFn calls |
5000 |
failRetryCount | number |
optional |
A value that indicates the number of attempts to call pollFn after catching an error. Zero means that polling will fail immediately after catching error. Any positive number means that Pollinator will try to poll that many times until it emits the Event.ERROR . |
3 |
Status
enum
{
IDLE, POLLING, FINISHED
}
Event
enum
enum Event {
POLL = 'poll',
END = 'end',
ERROR = 'error',
STATUS_CHANGE = 'statusChange',
}
Pollinator
instance methods and properties
Name | Type | Params | Description |
---|---|---|---|
start | method |
Starts polling and changes status to Status.POLLING |
|
stop | method |
Stops polling and changes status to Status.FINISHED |
|
pause | method |
Pauses polling and status changes to Status.IDLE |
|
on | method |
(event: Event, listener: function) => void |
Registers an event listener for a given Event type. |
off | method |
(event: Event, listener: function) => void |
Removes an event listener for a given Event type. |
status | property |
Get current status of your poller. Value is of type Status |
Building and contributing
If you want to contribute then please do. PRs are welcome. Before squashing any bug or adding a new feature please create an issue first. Also add a test case(s) before contributing any code.
After cloning the repo do the usual:
yarn
#or
npm i
To run tests use this script:
yarn test
To build run:
yarn build
To do
- max attempts - stop polling when a max number of attempts is achieved
- current attempts number in the event data
- timeout - configure max amount of time after which polling stops
- total polling time in the event data
Spread the pollen ๐ป
If you like this lib consider hitting that star โญ๏ธ button.
You can hit me up here