A rearranged handwired 75% keyboard powered by QMK Firmware. This has not been merged with the master branch of QMK as of yet.
Function row, navigation cluster and arrow keys found on a typical 75% keyboard arrangement have been moved as macro columns to the left and right of the alphas and modifiers for better symmetry.
Current layers contain:
- (0) - Standard QWERTY Layout (Caps Lock has been remapped to Ctrl)
- (1) - Typical 60% Function row location on the alpha numbers, Volume controls on R/L arrows, PgUp/Pgdn on Home/End, Caps Lock restored, plus a TT(2) on F2.
- (2) - DVORAK Layout (Caps Lock has been remapped to Ctrl)
- (3) - Same as (1), plus a TO(0) on F2.
Current pinouts are making use of an Elite-C.
- 78 x MX style switches
- 78 x 1N4148 diodes
- 4 x 2u Cherry plate mount stabilizers
- 1 x 7u Cherty plate mount stabilizer
- 1 x Elite-C
- 1 x Top Layer, Acrylic 5.6mm
- 1 x Bottom Layer, Acrylic 5.6mm
- 1 x Switch Plate, Delrin/POM 1.5mm
- 20 x M2 Heat Set Brass Threaded Inserts
- 10 x M2 Male-Female Standoffs (you can vary length to accomodate your handwiring and Elite-C placement)
- 10 x M2 Screws, 10mm length
- 1 x Keycap set (a standard 104 keyset with 7u spacebar should cover this layout)
- 1 x 21 gauge uninsulated brass wire (you can buy this by the spool)
- 23 x Dupont Connectors
- 23 x 0.1" / 2.54mm Right angle pin headers for the Elite-C