inerba / App-Brewery-Flutter-Null-Safety

An initiative to help students following AppBrewery Flutter course by providing necessary updated information

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

AppBrewery Flutter : Null Safety Guide

Read Before Starting

  • DISCLAIMER : This repository is not an official outcome of London AppBrewery Team

  • This repository is made to help new students get through AppBrewery Flutter Course

  • This repository contains notes for only coding (project) sections and explains what has changed and what's the difference.

  • If something is not covered here, start a discussion, not an issue! I will try to add it then.

  • Use latest versions of required packages and plugins, find them on pub.dev

Index

1. Terminology

2. Common issues and fixes

  1. Using old Flutter SDK?

  2. Android license status unknown

  3. Option to create a new package is missing

  4. Migrating V2

3. Resources

4. Code to Update

  1. Section 3 : I Am Rich App

  2. Section 7 : Dicee App

  3. Section 9 : Xylophone App

  4. Section 10 : Quizzler App

  5. Section 12 : BMI Calculator App

  6. Section 13 : Clima App

  7. Section 14 : Flash Chat App

Terminology

Go back to Index

1. Deprecated

  • You will often come across deprecated stuff, where it says This is deprecated. This means it's not recommended to use it anymore in your projects. You should avoid it and use alternatives.

2. Null Safety

  • Null safety is not your enemy! It's there you help you so you don't accidentally make something null and crash your app.

  • Dart has sound null safety. Basically, if you're writing any code that compiler thinks might end up being null, it will notify you right away! Isn't that cool?

  • Read more : Sound Null Safety, Understanding Null Safety, Null Safety in Flutter

Common Issues and Fixes

Go back to Index

1. Using old Flutter SDK?

  • Use latest Flutter SDK, currently I am using 2.2 in stable channel

    • To upgrade old one, run flutter upgrade in your Terminal / Command Prompt (cmd)

2. Android license status unknown

  • There are couple of things that can cause this, I'll keep adding them in future! For now I have these solutions,

    Solution 1. Accept the new ones!
    • Just run flutter doctor --android-licenses

    • Normally, this does the job. If it doesn't, go ahead.

    Solution 2. Install / Update SDK Command Line Tools
    • Open Settings panel by,

      • File > Settings (Windows and Linux)

      • Android Studio > Preferences (Mac)

    • Then navigate to,

      Appearance & Behavior > System Settings > Android SDK

    • Select the SDK Tools Tab

    • Select Android SDK Command Line Tools and click Apply

    • A dialog will pop up and ask you if you want to install these.

      Click Yes/OK and let it install, after that, close Android Studio and restart it.

3. Option to create a new package is missing

  • When I first encountered this issue, I thought there must be something wrong with just this particular update.

  • I searched it online, posted on Reddit, twitter, but found nothing.

  • Later on, I got to know that New > Package and New > Directory (Folder) options have now merged!

  • So, to create a new package or just a folder, simply use New > Directory option.

4. Migrating V2

  • As we know Sound Null Safety was added to Flutter 2.

  • And before Flutter 2 old apps don't have Sound Null Safety feature.

  • So we need to fix this, and thank Flutter we have simple way to do.

  • To fix this issue easily ,

    • Delete all files and folders in App folder except course materials lib - assets - fonts - pubspec.yaml etc.

    • For Example;

ww

  • And then go to Terminal while its in project folder and

    • Write this line to Terminal

      • flutter create .
  • For Example;

crate

  • Then Flutter starts rebuilding application with migrated version of it. And Done!

Resources

Go back to Index

1. Try out Null Safety on DartPad

2. Read Updated Flutter Docs

3. Watch and Follow Flutter's Official Youtube Channel

  • To learn more about Null Safety and staying updated in general.

Code to Update

Section 3 : I Am Rich App (Lesson 28)

Go back to Index
  • You right clicked on res folder but didn't find Image Asset? Don't worry Follow these steps,

    • Right click on android folder and a pop-up menu will open up.

      From that, select Flutter > Open Android Module in Android Studio

      If this doesn't work for you then follow these steps,

    1. Close current project by pressing File > Close Project

    2. Now you will have the first screen of Android Studio.

    3. Press Open an Existing Project, then Open File or Project dialog will open.

    4. Here, navigate to your Flutter project in which, you want to add Image Asset

    5. Expand that and you will find android folder. Select that and press OK

  • Both ways should open Android Part of your Flutter Project in Android Studio.

  • Now, at bottom right, if it's running any gradle processes, let it run. Don't interrupt! However, if you close it, it'll rebuild everything when you reopen it. So, no need to worry!

  • After that long build process completes, you can find Image Asset option when you click on res folder, Yay!

  • Add assets and again, File > Close Project, Open an Existing Project and this time, select your Flutter Project and continue!

Section 7 : Dicee App (Lesson 53)

Go back to Index
  • FlatButton is deprecated, so use TextButton instead.

Section 9 : Xylophone App (Lessons 76, 77)

Go back to Index
  • Getting a lengthy error when trying to use audioplayers plugin?

    • All you need to do is open android > build.gradle (Project Level gradle file)

    • Inside buildscript {}, you'll find ext.kotlin_version (Line 2 in file)

    • Replace whatever version it is with Latest Stable Kotlin Version

    • As of July 23, 2021 it is, ext.kotlin_version = '1.5.21'

    • Now, re-install the app. If it's already running, press Stop then press Run (Play) again.

  • FlatButton is deprecated, so use TextButton instead.

  • By the end, the implementation of your TextButton should look like this:

    @override
    Widget build(BuildContext context) {
      return Expanded(
        child: TextButton(
          style: ButtonStyle(
            backgroundColor: MaterialStateProperty.all(color),
          ),
          onPressed: () {
            playSound(soundNumber);
          },
        ),
      );
    }
  • AudioCache is deprecated, so use AudioPlayer instead.

  • By the end, your solution to playing the audio should look like this:

void playSound(int soundNumber) {
  final player = AudioPlayer();
  player.setSource(AssetSource('note$soundNumber.wav'));
}
  • An example of a working project as of 16/07/2022 has been linked below:

Section 10 : Quizzler App (Lesson 94)

Go back to Index
  • Due to null safety, all variables in a class must have a value assigned, when created. If not, they must be declared Nullable intentionally. This rule also applies to Stateless and Stateful widgets. On top of that, in classes extending StatelessWidget, all variables must be declared final

  • So, make your Question class like this,

    class Question {
      String questionText;
      bool questionAnswer;
    
      Question(this.questionText, this.questionAnswer);
    
      // If you want named parameters
      // Question({required this.questionText, required this.questionAnswer});
    }
    • @required is replaced by just required (Without @ sign)

    • Here, the Keyword this points to current context, which happens to be Question class.

  • FlatButton is deprecated, so use TextButton instead.

Section 12 : BMI Calculator App (Lessons 125, 126, 128, 129)

Go back to Index
  • @required is replaced by just required (Without @ sign)

  • So, while making ReusableCard, lesson shows you can skip using cardChild property, but that isn't possible, due to null safety

    • This part is tricky, because now you can't have null arguments anymore.

    • So, you must have to intentionally make it Nullable, by adding ? to it, like this,

      class ReusableCard extends StatelessWidget {
        final Color colour;
        final Widget? cardChild;
      
        ReusableCard({required this.colour, this.cardChild});
      
        @override
        Widget build(BuildContext context) {
          return Container(
            decoration: BoxDecoration(
              color: colour, 
            ),
            child: child,
          );
        }
      }
    • Use it like ReusableCard(color: Colors.amber) and your app won't crash.

  • But, it's not same for IconContent, Icon can have null value, but Text can't!

    class IconContent extends StatelessWidget {
      final IconData? icon;
      final String? label;
    
      IconContent({this.icon, this.label});
    
      @override
      Widget build(BuildContext context) {
        return Column(
          children: [
            Icon(icon),
            Text(label ?? ''),
          ],
        );
      }
    }
    • So using ?? operator, you need to check if label is null or not, if it is, then you must provide a String value to it. Here, I provided an empty String.

    • Even if you don't pass any arguments like IconContent(), your app won't crash.

  • According to Lesson 129, ReusableCard now has a parameter named onPress, to get it working, use this,

    class ReusableCard extends StatelessWidget {
      final Color colour;
      final Widget? cardChild;
      final void Function()? onPress;
    
      ReusableCard({required this.colour, this.cardChild, this.onPress});
    
      @override
      Widget build(BuildContext context) {
        return GestureDetector(
          onTap: onPress,
          child: Container(
            decoration: BoxDecoration(
              color: colour, 
            ),
            child: child,
          ),
        );
      }
    }
    • Because GestureDetector's onTap property wants void Function()? as argument.
  • In Lesson 128, _InputPageState has a new variable which haven't been initialized. As I already told you, you must initialize them or make them Nullable.

    class _InputPageState extends State<InputPage> {
      Gender? selectedGender;
    }
    • Here, making it Nullable will do the job. Rest of the code will work perfectly fine.

Section 13 : Clima App (Lesson 140)

Go back to Index
  • When running this app on a Physical Device running on:

    • Android : you will need Internet Permission because the app sends a request to the OpenWeatherMap API. For this, open AndroidManifest.xml by navigating to,

      android > app > src > main > AndroidManifest.xml

      and add the following line,

      <uses-permission android:name="android.permission.INTERNET"/>

      Keep the existing location permissions and add this above/below them. Add it under manifest tag, like this,

      <manifest xmlns:android="http://schemas.android.com/apk/res/android"
        package="detaineddeveloper.example.clima">
      
        <uses-permission android:name="android.permission.ACCESS_COARSE_LOCATION"/>
        <uses-permission android:name="android.permission.ACCESS_FINE_LOCATION"/>
      
        <!--Keep the existing location permissions above (whichever you have added previously)-->
        <uses-permission android:name="android.permission.INTERNET"/>
      
        <application
          android:label="clima"
          android:icon="@mipmap/ic_launcher">
          .
          .
          .
        </application>
      </manifest>
    • iOS :

      • There is no required Internet Permission.
      • When launching the app, you will probably have a message asking you for Local Network Permission: it is not required either.
      • To run your app on an iOS physical device, make sure that you selected a Development Team (refer to Section 4 - Lesson 32 of the course):
        1. Open the Flutter project's Xcode target with open ios/Runner.xcworkspace
        2. Select the 'Runner' project in the navigator then the 'Runner' target in the project settings
        3. Make sure a 'Development Team' is selected under Signing & Capabilities > Team. You may need to:
          1. Log in with your Apple ID in Xcode first
          2. Ensure you have a valid unique Bundle ID (for example "com.put-your-name-here.clima")
          3. Register your device with your Apple Developer Account
          4. Let Xcode automatically provision a profile for your app
        4. Select your iOS physical device as the target and click the Run button
        • You may have several pop-up asking you that "codesign" wants access to your Apple Development Team's key. Accept by entering your password (it's your Mac session's password, not your Apple ID's password)
        • ATTENTION: if you don't activate Internet on your physical device, it is likely that you will see a pop-up on your screen telling you that an Internet connection is required to verify if the developer (you) is reliable, so you would need to activate your Internet connection
  • If your app cannot retrieve your current location on your iOS physical device it is probably because the geolocator 8.2.1 flutter package has been updated and you will need to apply the following changes:

    • As of now (June 2022), the geolocator package indicates to add both NSLocationWhenInUseUsageDescription and NSLocationAlwaysUsageDescription permissions to access Location Service. Since iOS 11, the NSLocationAlwaysUsageDescription property key is deprecated. Use instead only one of those permissions:

      • the NSLocationAlwaysAndWhenInUseUsageDescription to enable the Location Service in foreground and background,
      • the NSLocationWhenInUseUsageDescription to enable the service in foreground only, as recommended by Apple.

      To do so, open Info.plist file by navigating to:

      ios > Runner > Info.plist

      and add the following line right under the <dict> tag (your can customise the message in the <string> tag, it has to explain why your app needs to have access to that particular permission):

      <dict>
          <key>NSLocationWhenInUseUsageDescription</key>
          <string>This app needs access to your location to provide weather data of your current location.</string>
      </dict>
    • In your code you will have to explicitly ask the user for permission to use the Location Service. For that, update the getCurrentLocation() method in the location.dart file:

      • Short version:
        Future<void> getCurrentLocation() async {
          try {
            LocationPermission locationPermission = await Geolocator.requestPermission();
        
            if (LocationPermission.whileInUse == locationPermission || LocationPermission.always == locationPermission) {
              Position position = await Geolocator.getCurrentPosition(desiredAccuracy: LocationAccuracy.lowest);
              latitude = position.latitude;
              longitude = postion.longitude;
            }
          } catch (e) {
            print(e);
          }
        }
      • Long but more complete version:
        Future<void> getCurrentLocationCheckingPermissions() async {
          bool serviceEnabled;
          LocationPermission locationPermission;
        
          // Test if location services are enabled.
          serviceEnabled = await Geolocator.isLocationServiceEnabled();
          if (!serviceEnabled) {
            // Location services are not enabled don't continue
            // accessing the position and request users of the
            // App to enable the location services.
            return Future.error(
                'Location services are disabled. Please activate them.');
          } else {
            locationPermission = await Geolocator.checkPermission();
            if (LocationPermission.unableToDetermine == locationPermission) {
              return Future.error(
                  'Unable to determine if location permissions are enabled.');
            } else if (LocationPermission.denied == locationPermission ||
                LocationPermission.deniedForever == locationPermission) {
              print(Future.error('Location permissions are denied: ' +
                  locationPermission.toString()));
              locationPermission = await Geolocator.requestPermission();
            }
        
            if (LocationPermission.whileInUse == locationPermission ||
                LocationPermission.always == locationPermission) {
              Position position = await Geolocator.getCurrentPosition(
                  desiredAccuracy: LocationAccuracy.lowest);
              this.latitude = position.latitude;
              this.longitude = position.longitude;
            }
          }
        }

Section 14 : Flash Chat App (Lessons 169-194)

Go back to Index

Setting up Firebase

Following the Appbrewery course, you should have logged in Firebase with your Google account, and created a Firebase project that will be linked with your Flash Chat Flutter project.

Add Firebase to your Flutter project

  • To do so, in the course it is showed that you have to go to your Firebase project and add a new application, selecting an Android application if you plan to deploy your app on Android, and/or an iOS application if you plan to deploy on iOS.
  • As of now (July 2022), it is now possible to directly add a Flutter application which will save you a lot of time in configuration 🎊 , so choose that option instead, and follow the instructions that will be displayed:

Installing Firebase CLI and connect to it

  • Depending on your Operating System (Windows, macOS or Linux), you will find the steps to do on the documentation.
  • After the installation is done, connect to it by executin the following command in a terminal: firebase login.

Installing Flutter SDK and creating a Flutter project

  • If you have arrived this far in the course, you have already installed the Flutter SDK a long time ago!
  • The Flutter project has alo been created already, it's our Flash Chat Flutter project.

Installing the FlutterFire CLI

  • Open a terminal and run the following command line: dart pub global activate flutterfire_cli (it doesn't matter in which directory you run this command)

Executing the FlutterFire CLI

  • Before executing the FlutterFire CLI, make sure to change your Application ID for Android, and your iOS Bundle ID for iOS to make them unique and personal (if you have copied the Flash Chat Flutter project from the Appbrewery course, they are defined with their company ID which you have to change to make it your own):

    • Application ID for Android:

      • Open the build.gradle file located under android > app > build.gradle
      • Change the android > defaultConfig > applicationId property (the applicationId should be co.appbrewery.flash_chat --> change it for something unique and personal like com.firstnamelastname.flash_chat, or something you like that is unique and personal, or your domain name if you own one and wish to use it)
    • iOS Bundle ID for iOS:

      • Right-click on the "ios" folder and choose Flutter > Open iOS module in Xcode
      • Select "Runner" at the top of the left panel (the "Runner" with the blue icon), and in the center panel go to the General tab, then under it go to Identity > Bundle Identifier
      • You should find a Bundle Identifier like co.appbrewery.flashChat --> change it for something unique and personal like com.firstnamelastname.flashChat
  • After changing the Application ID for Android, and/or the iOS Bundle Identifier for iOS, open a terminal and go to the ROOT FOLDER of your Flutter Flash Chat project, then execute the command line given in the instructions:

    flutterfire configure --project=YOUR_FIREBASE_PROJECT_ID_HERE

    (You can check what is your Firebase Project ID by either looking on your Firebase account in a browser, or by running the command line firebase projects:list)

  • After running the previous command, you should find in your Flutter project:

    • Flutter: your Firebase configuration file under lib > firebase_options.dart (the most important one, it contains both your Android and your iOS API keys to access Firebase services)

    • Android: your Firebase configuration file under android > app > google-services.json

    • iOS: a Firebase identifying file under ios > firebase_app_id_file.json (if the course is not updated, you might see that you should have a file called GoogleService-Info.plist instead under ios > Runner > GoogleService-Info.plist --> I am not an expert with Firebase, but my guess is that the GoogleService-Info.plist comes up when you configure your Firebase project by adding an iOS application instead of a Flutter application)

Initialising Firebase

  • To initialise Firebase, start by adding to your Flutter project the firebase_core plugin:

    flutter pub add firebase_core
  • Make sure that the Firebase configuration of your Flutter application is updated, by running the following command in the root folder of your Flutter project directory:

    flutterfire configure
  • Then, if everything's fine, in your lib/main.dart file, change the main method to use the Firebase initialising method Firebase.initializeApp()

    import 'package:firebase_core/firebase_core.dart';
    import 'package:flash_chat/firebase_options.dart';
    
    
    Future<void> main() async {
      WidgetsFlutterBinding.ensureInitialized();
    
      await Firebase.initializeApp(options: DefaultFirebaseOptions.currentPlatform);
    
      runApp(FlashChat());
    }

    ❗❗ It is FUNDAMENTAL that you add the parameter options: DefaultFirebaseOptions.currentPlatform because it will specify the configuration that will be used depending on the platform your application is running on (Android, iOS, macOS, Windows or Linux) --> feel free to explore the code of DefaultFirebaseOptions.currentPlatform, you will notice that it corresponds to your lib > firebase_options.dart, and that it simply verifies the platorm on which your application is running, then returns the appropriate configuration.

  • Finally, stop your application if it was running (to make a fresh start), and try to run it on Android and on iOS to verify that everything works on both platform (try to run it as well on macOS, Windows and/or Linux if you are developing for those platforms).

    If you encounter some errors, please have a look below to find some fixes that may be of help:

    • On Android:

      • The firebase_core plugin (as well as all Firebase plugins) requires at least the Android SDK version 31 now (July 2022), so make the modification if needed under android > app > build.gradle:
        android {
          compileSdkVersion 31
          ...
        }
    • On iOS:

      • There was no problem encountered on my side. Please add more details about yours in the Discussions section if you have troubles here.

Adding Firebase Plugins

  • Add the firebase_auth and the cloud_firestore plugins in your Flutter project:

      flutter pub add firebase_auth
      flutter pub add cloud_firestore

    Click on Pub Get to make sure that you get the dependencies in your project.

  • On Android:

    • You may need to upgrade the minSdkVersion of the Android part of your Flutter project, under android > app > build.gradle, because some Firebase plugins have a minimal requirement of the SDK version 21 now (July 2022), like the cloud_firestore plugin for instance, so apply that change:

        android {
          ...
          defaultConfig {
            ...
            minSdkVersion 21
            ...
          }
          ...
        }
    • Those plugins require as well the Android SDK version 31, so make sure that you have it updated in your android > app > build.gradle:

        android {
          compileSdkVersion 31
          ...
        }
    • After adding the dependencies in the AndroidManifest.xml file and the build.gradle files, you might get this error:

        ERROR:D8: Cannot fit requested classes in a single dex file (# methods: 104246 > 65536)
        com.android.builder.dexing.DexArchiveMergerException: Error while merging dex archives:
        The number of method references in a .dex file cannot exceed 64K.
         ...
        * What went wrong:
          Execution failed for task ':app:mergeExtDexDebug'.
        > A failure occurred while executing com.android.build.gradle.internal.tasks.DexMergingTaskDelegate
        > There was a failure while executing work items
        > A failure occurred while executing com.android.build.gradle.internal.tasks.DexMergingWorkAction
        > com.android.builder.dexing.DexArchiveMergerException: Error while merging dex archives:
        The number of method references in a .dex file cannot exceed 64K.
        Learn how to resolve this issue at https://developer.android.com/tools/building/multidex.html

      To fix this issue, inside the app-level build.gradle file, ../android/app/build.gradle, the minSdkVersion property under the defaultConfig block in the android block should be set to 21 to avoid error. This is because multiDex support is enabled by default for sdkVersion 21.

    • Additional dependencies have to be added to the app-level build.gradle file, ../android/app/build.gradle:

      dependencies {
        ...
        implementation platform('com.google.firebase:firebase-bom:30.0.1')
        implementation 'com.google.firebase:firebase-auth'
        implementation 'com.google.firebase:firebase-firestore'
        ...
      }
      
    • To enable internet connectivity on a physical device, add <uses-permission android:name="android.permission.INTERNET" /> to the AndroidManifest.xml file.

  • On iOS :

    • Before running the application to check if everything is fine, update CocoaPods:
        pod repo update
        sudo gem install cocoapods
        pod setup
    • Run your app to check if it's working:
      • If you encounter the following error:
          Error output from Cocoapods:
            [!] Automatically assigning platform 'iOS' with version '9.0' on target 'Runner' because no platform was specified. Please specify a platform for this target in your Podfile.android
          Error running pod install
          Error launching application on iPhone.
        update your Podfile file under ios > Podfile by uncommenting the "platform" line and changing the version from 9.0 to 10.0 --> this specifies the minimum OS version that you are going to support for the pod project:
          # Uncomment this line to define a global platform for your project
          platform :ios, '10.0'
        
        then try to run your app again (it might take a long time, it took me around 30 minutes to make all the cocoapods installation). You should see in the "Run tab" the information "Running pod install...": Flutter is initiating that to be able to install all of the Firebase plugin packages (firebase_core, firebase_auth and cloud_firestore) as cocoapods to our iOS app.

Code Part

  • In chat_screen.dart file, the object type for the loggedInUser was previously FirebaseUser, and should now be replaced with User. Moreover, the Firestore instance is now retrieved with FirebaseFirestore.instance instead of Firestore.instance:

      class _ChatScreenState extends State<ChatScreen> {
        final _firestore = FirebaseFirestore.instance;
        final _auth = FirebaseAuth.instance;
        User loggedInUser;
        String message;
        ...
      }
    
  • When retrieving the messages from your Firestore Database, you will notice some changes in the API:

    • The getDocuments method has been renamed to get:

        _firestore.collection('messages').getDocuments(); // <-- BEFORE
      
        _firestore.collection('messages').get(); // <-- NOW
    • The QuerySnapshot property, documents, has been renamed to docs.

        void getMessages() async {
          final messages = await _firestore.collection('messages').get();
      
          for (var message in messages.documents) { // <-- BEFORE
            print(message.data());
          }
      
          for (var message in messages.docs) { // <-- NOW
            print(message.data());
          }
        }
  • When using a StreamBuilder, it is better to give it the type of data that will stream through, as it will greatly help you when manipulating the AsyncSnapshot and the data it contains (snapshot.data) - you can find the type of data by looking at the return type of the Firestore snapshots method (_firestore.collection('messages').snapshots()):

      StreamBuilder<QuerySnapshot<Map<String, dynamic>>>( // <-- By adding the type <QuerySnapshot<Map<String, dynamic>>...
        stream: _firestore.collection('messages').snapshots(),
        builder: (BuildContext context, AsyncSnapshot snapshot) {
    
          final messages = snapshot.data.docs; // <-- ... you will be able to access the 'docs' property because we manipulate a Stream of QuerySnapshot
    
          for (var message in messages) {
            final messageText = message.data()['text'];  // <-- ... you will be able to access the Map with `message.data()` because we manipulate a Stream of QuerySnapshot of Map<String, dynamic>
            final sender = message.data()['sender'];
            ...
          }
          ...
        },
      );
  • To deal with the case where we would have no data in our StreamBuilder, we do add a CircularProgressIndicator after checking the value of !snapshot.hasData. To center it on the screen, add a margin using MediaQuery to retrieve the height of the screen (if you want to see how it looks like, you can simply temporarily change the if condition with true):

      StreamBuilder<QuerySnapshot<Map<String, dynamic>>>(
        stream: _firestore.collection('messages').snapshots(),
        builder: (context, snapshot) {
    
          if (!snapshot.hasData) { // <-- change it temporarily to 'if (true)' to quickly see the result
            return Container(
              margin:
                  EdgeInsets.only(top: MediaQuery.of(context).size.height / 3),
              child: CircularProgressIndicator(
                backgroundColor: Colors.lightBlueAccent,
              ),
            );
          }
          ...
        },
      );

    ❗ℹ️ To avoid your CircularProgressIndicator to be stretched horizontally and look weird, make sure that the column in which your MessagesStream is into doesn't have the property crossAxisAlignment: CrossAxisAlignment.stretch:

      body: SafeArea(
        child: Column(
          mainAxisAlignment: MainAxisAlignment.spaceBetween,
          // crossAxisAlignment: CrossAxisAlignment.stretch, // <-- remove this if you have it
          children: <Widget>[
            MessagesStream(),
            Container(...),
            ...
  • The sorting of the messages in the chat screen is still chaotic even after the reversal in lesson 191. To fix this problem, we need to add a timestamp field to the messages and sort the collection based on it as shown here:

    ...
    TextButton(
      onPressed: () {
        controller.clear();
        _firestore.collection('messages').add({
          'text': messageText,
          'sender': loggedInUser.email,
          'timestamp': FieldValue.serverTimestamp(), // Here is the **timestamp** field.
        });
      },
    ...

    We use the server time instead of generating a timestamp with the user device because:

    • Our users may be in different timezones so the time differences will affect our app.
    • Some devices could be set to incorrect times.
    class MessagesStream extends StatelessWidget {
    
    @override
    Widget build(BuildContext context) {
      return StreamBuilder<QuerySnapshot>(
        stream: _firestore.collection('messages').orderBy('timestamp').snapshots(), // Here, the **.orderBy** sorts the messages according to the server timestamps.
        builder: (context, snapshot) {
        ...
    

More Configuration on Firebase

Cloud Firestore Authorisation and Security Rules

  • In lesson 192, we change the Security Rules of our Firestore Database to allow read and write access to authentified users only. In the course, we add the following condition request.auth.uid != null. As of now (July 2022), we have to change this condition with the following one, regarding the documentation: request.auth != null
      rules_version = '2';
      service cloud.firestore {
        match /databases/{database}/documents {
          match /{document=**} {
            allow read, write: if
                request.auth != null // <-- here it is
        
                && request.time < timestamp.date(2022, 8, 5); // <-- if you wish to, you can add this condition that will only allow access to your database **before** a specified date
          }
        }
      }
    
    ❗❗ℹ️ Keep in mind that the above rules are not secure enough at all. They are only good for developing purpose, but the moment you release your application in production (or even when you simply share it with other people that you don't know), you have to reinforce your Security Rules to be less permisive and have better and stronger control on whose accessing your database, and what data they have access to.

About

An initiative to help students following AppBrewery Flutter course by providing necessary updated information

License:MIT License