Automated vSphere & vSAN 8 Lab Deployment

Description
Changelog
Requirements
Configuration
Logging
Sample Execution

Description

Similar to previous "Automated Lab Deployment Scripts" (such as here, here, here, here and here), this script makes it very easy for anyone to deploy a vSphere 8.x environment for learning and educational purposes.

Below is a diagram of what is deployed as part of the solution and you simply need to have an existing vSphere environment running that is managed by vCenter Server and with enough resources (CPU, Memory and Storage) to deploy this "Nested" lab.

Changelog

10/11/2022
- Initial Release

Requirements

vCenter Server running at least vSphere 7.x or later
- If your physical storage is vSAN, please ensure you've applied the following setting as mentioned here
ESXi Networking
- Enable either MAC Learning or Promiscuous Mode on your physical ESXi host networking to ensure proper network connectivity for Nested ESXi workloads
Desktop (Windows, Mac or Linux) with latest PowerShell Core and PowerCLI 12.1 Core installed.
- See instructions here for more details
vSphere 8.x OVAs:
- vCenter Server Appliance 8.0 Build 20519528
- Nested ESXi 8.0 IA OVA

Configuration

Before you can run the script, you will need to edit the script and update a number of variables to match your deployment environment. Details on each section is described below including actual values used in my home lab environment.

This section describes the credentials to your physical vCenter Server in which the vSphere 8.x lab environment will be deployed to:

$VIServer = "FILL-ME-IN"
$VIUsername = "FILL-ME-IN"
$VIPassword = "FILL-ME-IN"

This section describes the location of the files required for deployment.

$NestedESXiApplianceOVA = "/Volumes/Storage/Software/VMware/Lab/Nested_ESXi8.0_IA_Appliance_Template_v2.ova"
$VCSAInstallerPath = "/Volumes/Storage/Software/VMware/Lab/VMware-VCSA-all-8.0.0-20519528"

Note: The path to the VCSA Installer must be the extracted contents of the ISO

This section defines the number of Nested ESXi VMs to deploy along with their associated IP Address(s). The names are merely the display name of the VMs when deployed. At a minimum, you should deploy at least three hosts, but you can always add additional hosts and the script will automatically take care of provisioning them correctly.

$NestedESXiHostnameToIPs = @{
    "esxi-1" = "192.168.30.181"
    "esxi-2" = "192.168.30.182"
    "esxi-3" = "192.168.30.183"
}

This section describes the resources allocated to each of the Nested ESXi VM(s). Depending on your usage, you may need to increase the resources. For Memory and Disk configuration, the unit is in GB.

$NestedESXivCPU = "4"
$NestedESXivMEM = "10" #GB
$NestedESXiCachingvDisk = "8" #GB
$NestedESXiCapacityvDisk = "40" #GB

This section describes the VCSA deployment configuration such as the VCSA deployment size, Networking & SSO configurations. If you have ever used the VCSA CLI Installer, these options should look familiar.

$VCSADeploymentSize = "tiny"
$VCSADisplayName = "vcsa-1"
$VCSAIPAddress = "192.168.30.180"
$VCSAHostname = "192.168.30.180" #Change to IP if you don't have valid DNS
$VCSAPrefix = "24"
$VCSASSODomainName = "vsphere.local"
$VCSASSOPassword = "VMware1!"
$VCSARootPassword = "VMware1!"
$VCSASSHEnable = "true"

This section describes the location as well as the generic networking settings applied to Nested ESXi VCSA & NSX VMs

$VMDatacenter = "Primp-Datacenter"
$VMCluster = "Supermicro-Cluster"
$VMNetwork = "VM Network"
$VMDatastore = "sm-vsanDatastore"
$VMNetmask = "255.255.255.0"
$VMGateway = "192.168.30.1"
$VMDNS = "192.168.30.2"
$VMNTP = "45.87.78.35"
$VMPassword = "VMware1!"
$VMDomain = "primp-industries.local"
$VMSyslog = "172.17.33.3"
$VMFolder = "Workloads"
# Applicable to Nested ESXi only
$VMSSH = "true"
$VMVMFS = "false"

This section describes the configuration of the new vCenter Server from the deployed VCSA. Default values are sufficient.

$NewVCDatacenterName = "Datacenter"
$NewVCVSANClusterName = "Cluster"
$NewVCVDSName = "VDS"
$NewVCMgmtPortgroupName = "DVPG-Management-Network"

Once you have saved your changes, you can now run the PowerCLI script as you normally would.

Logging

There is additional verbose logging that outputs as a log file in your current working directory vsphere-vsan-8-lab-deployment.log

Sample Execution

Here is a screenshot of running the script if all basic pre-reqs have been met and the confirmation message before starting the deployment:

Here is an example output of a completed deployment:

Note: Deployment time will vary based on underlying physical infrastructure resources. In my lab, this took ~37min to complete.

Once completed, you will end up with your deployed vSphere & vSAN 8 Lab which is placed into a vApp

indigo423 / vsphere-8-lab-deployment