ilya-zlobintsev / LACT

Linux AMDGPU Configuration Tool

ilya-zlobintsev/LACT Issues

The mkinitcpio terminal output window is too long
Updated 3 days ago
Lact causes the screen to flicker when it's running when I choose anything above 120Hz !
Updated 4 days ago3
Custom power profile
Closed 6 days ago1
Save debug snapshots to `XDG_DATA_HOME/Downloads/` instead of `/tmp`
Closed 10 days ago3
Vega 64 - Voltage not applying after PC restart
Closed 11 days ago6
Fan curve editing crashes when any non-numerical string is entered
Closed 11 days ago1
My card model (Asrock Taichi 6800XT) isn't recognized properly, detected as "Unknown (0x5201)"
Closed 11 days ago2
Make an option to put a LACT indicator in the menu bar, to make visible that the daemon is still running in the background
Closed 11 days ago2
Introduce some sort of crash watchdog that resets GPU (especially the fan curve) to default on lactD crash.
Closed 12 days ago1
Power usage limit
Updated 13 days ago3
Fix Musl compatibilty (malloc_trim)
Closed 21 days ago3
Updated to lact v0.5.5 earlier today and it led to massive instability on Ubuntu 24.04
Closed 21 days ago10
Fan stop
Updated 23 days ago4
Control CPU/system fans
Closed a month ago4
Unable to change Power Level Mode since 0.5.4
Closed a month ago4
investigate regarding drm/amd issue 3131
Closed a month ago18
multiple errors
Updated 2 months ago5
OC settings not being applied if fan control is used at the same time
Closed 2 months ago2
Cannot control fan settings on Gigabyte 7900GRE
Closed 2 months ago7
Provide Fedora RPM spec file
Closed 2 months ago1
Power level mode always returns to “BOOTUP_DEFAULT”.
Closed 4 months ago3
Wrong temp for Fan control and the settings do not apply
Updated 2 months ago10
Compiling lact-gui failed
Closed 2 months ago2
Enable systemd service hardening features for the daemon
Updated 2 months ago2
Wrong pcie link reported
Closed 2 months ago2
WX 4100, Fan Curve not accurate
Updated 3 months ago4
Adding fan speed to histogram
Closed 3 months ago2
Fan speed indicator always stays at zero RPM
Updated 3 months ago3
Clockspeed / voltages are set but not applied. (7900XTX)
Closed 3 months ago3
Could not connect to daemon, running in embedded mode.
Closed 3 months ago3
Adding it as an applet in the new COSMIC Desktop (written in Rust)
Updated 3 months ago2
works on ubuntu noble
Closed 3 months ago
Power control does not remain set when pressing "esc" in Helldivers 2 on 7000 series (RDNA3)
Closed 3 months ago2
Daemon Service will not start on Manjaro
Closed 3 months ago7
NixOS has no option to start service
Closed 3 months ago4
Dual RX6600s - Only one GPU detected
Updated 3 months ago8
Fans stay off after resuming from suspend
Updated 4 months ago2
Is my gpu supported?
Closed 4 months ago1
Add the ability to define power profile mode for indivdual applications.
Updated 4 months ago2
Resizeable bar reporting
Updated 4 months ago2
curve fan control not working
Updated 4 months ago2
Make historical charts better accessible and some thoughts on GTK
Closed 4 months ago1
constant reporting of throttling while at, essentially,. idle
Closed 4 months ago3
RDNA2 6850M XT: cannot set any profile besides default, power limit has lowered
Closed 4 months ago4
Packages formats
Closed 4 months ago2
Could not Connect to daemon despite service running
Closed 4 months ago3
Debian VBIOS dump error, DebugFS not found
Closed 4 months ago6
Failed to compile on ppc64le architecture
Closed 4 months ago2
[feature request] Provides DEB, RPM packages for ppc64le architecture
Updated 4 months ago4
CPU Govnor
Closed 4 months ago1