https://trashman.wiki/keyboards/v4n4g0n
https://github.com/AcheronProject/AlexandriaLibrary
https://github.com/keebio/Keebio-Parts.pretty
https://github.com/ai03-2725/MX_Alps_Hybrid/tree/master/MX_Only.pretty
The provided gerbers have been created according to the specifications of JLCpcb. For plate the size is 275.3mm * 113.4mm
The case is designed to be cut out of 3mm acryllic and uses a 1.5mm switchplate.
I used 4mm female to female m2 standoffs from this listing: https://www.aliexpress.com/item/1005003106030065.html
https://i.imgur.com/W8KVRhH.png Picture for reference if the listing gets deleted
This case has been printed fully and works, but the screwholes are too tight and have to be drilled.
Updated case design with heat insrets and correct size holes at some point.
I have provided a compiled .hex and a layout json that will let you use the keyboard with VIA.
The full QMK library is also provided incase it is needed.
- 1x PCB
- 1x 1.5mm Switchplate
- 3x 2U PCB mounted stabiliser
- 54x Kailh MX Hotswap Sockets or equivalent
- 54x MX style switch
- 54x SOD-123 diodes
- 1x Arduino Pro Micro or a drop-in replacement
- 1x PCB
- 1x 1.5mm Switchplate
- 3x 2U PCB mounted stabiliser
- 54x Kailh MX Hotswap Sockets or equivalent
- 54x MX style switch
- 54x SOD-123 diodes
- 1x nice!nano v2
- 1x 3.7V lipo battery
- 1x JS202011AQN Slide Switch (or similar)
- 1x Of each layer listed in the acryllic case file.
- 8x 4-6mm m2 female to female standoffs
- 16x m2 screws/bolts
- 1x Top case
- 1x Bottom case
- 4x m2x15 & 4x m2x10 screws/bolts (i suggest self tapping screws so they dig into the case top plastic better)
