FerrmRidder
Requirements
- Raspberry Pi 3 with Raspbian
- VL53L0X distance sensor
- Neopixel LED strip (WS2813)
- USB Audio output device (e.g. usb -> 3.5inch audio converter)
- Raspberry Pi breakout board with connectors for sensors (See Breakout directory)
Installation Instructions
Download New Raspbian headless image and flash sd card
On a Mac:
diskutil unmountdisk /dev/disk2
sudo dd bs=2m if=2019-07-10-raspbian-buster-lite.img of=/dev/rdisk2
Boot raspberry pi and configure wifi and enable ssh and I2C
sudo raspi-config
Updates
sudo apt update && sudo apt upgrade
Install pip for python3
sudo apt-get install python3-pip
Install python dependencies, neopixel modules etc
sudo pip3 install rpi_ws281x adafruit-circuitpython-neopixel pygame libsdl-mixer1.2
sudo pip3 install adafruit-circuitpython-vl53l0x
sudo pip3 install adafruit-circuitpython-vl6180x
Then we'll follow this Stackexchange answer to enable USB audio.
send audio to pi
tar -czvf audio.tar.gz audio
scp audio.tar.gz pi@ip:~