Graphite Exporter

An exporter for metrics exported in the Graphite plaintext protocol. It accepts data over both TCP and UDP, and transforms and exposes them for consumption by Prometheus.

This exporter is useful for exporting metrics from existing Graphite setups, as well as for metrics which are not covered by the core Prometheus exporters such as the Node Exporter.

Usage

make
./graphite_exporter

Configure existing monitoring to send Graphite plaintext data to port 9109 on UDP or TCP. As a simple demonstration:

echo "test_tcp 1234 $(date +%s)" | nc localhost 9109
echo "test_udp 1234 $(date +%s)" | nc -u -w1 localhost 9109

Metrics will be available on http://localhost:9108/metrics.

To avoid using unbounded memory, metrics will be garbage collected five minutes after they are last pushed to. This is configurable with the --graphite.sample-expiry flag.

Graphite Tags

The graphite_exporter accepts metrics in the tagged carbon format. Labels specified in the mapping configuration take precedence over tags in the metric. In the case where there are valid and invalid tags supplied in one metric, the invalid tags will be dropped and the graphite_tag_parse_failures counter will be incremented. The exporter accepts inconsistent label sets, but this may cause issues querying the data in Prometheus.

Metric Mapping and Configuration

Please note there has been a breaking change in configuration after version 0.2.0. The YAML style config from statsd_exporter is now used. See conversion instructions below

YAML Config

The graphite_exporter can be configured to translate specific dot-separated graphite metrics into labeled Prometheus metrics via YAML configuration file. This file shares syntax and logic with statsd_exporter. Please follow the statsd_exporter documentation for usage information. However, graphite_exporter does not support all parsing features at this time. Any feature based on the 'timer_type' option will not function. Otherwise, regex matching, groups, match/drop behavior, should work as expected.

Metrics that don't match any mapping in the configuration file are translated into Prometheus metrics without any labels and with names in which every non-alphanumeric character except _ and : is replaced with _.

If you have a very large set of metrics you may want to skip the ones that don't match the mapping configuration. If that is the case you can force this behaviour using the -graphite.mapping-strict-match flag, and it will only store those metrics you really want.

An example mapping configuration:

mappings:
- match: test.dispatcher.*.*.*
  name: dispatcher_events_total
  labels:
    action: $2
    job: test_dispatcher
    outcome: $3
    processor: $1
- match: '*.signup.*.*'
  name: signup_events_total
  labels:
    job: ${1}_server
    outcome: $3
    provider: $2
- match: 'servers\.(.*)\.networking\.subnetworks\.transmissions\.([a-z0-9-]+)\.(.*)'
  match_type: regex
  name: 'servers_networking_transmissions_${3}'
  labels: 
    hostname: ${1}
    device: ${2}

This would transform these example graphite metrics into Prometheus metrics as follows:

test.dispatcher.FooProcessor.send.success
 => dispatcher_events_total{processor="FooProcessor", action="send", outcome="success", job="test_dispatcher"}

foo_product.signup.facebook.failure
 => signup_events_total{provider="facebook", outcome="failure", job="foo_product_server"}

test.web-server.foo.bar
 => test_web__server_foo_bar{}

servers.rack-003-server-c4de.networking.subnetworks.transmissions.eth0.failure.mean_rate
 => servers_networking_transmissions_failure_mean_rate{device="eth0",hostname="rack-003-server-c4de"}

Conversion from legacy configuration

If you have an existing config file using the legacy mapping syntax, you may use statsd-exporter-convert to update to the new YAML based syntax. Here we convert the old example synatx:

$ go get -u github.com/bakins/statsd-exporter-convert

$ cat example.conf
test.dispatcher.*.*.*
name="dispatcher_events_total"
processor="$1"
action="$2"
outcome="$3"
job="test_dispatcher"

*.signup.*.*
name="signup_events_total"
provider="$2"
outcome="$3"
job="${1}_server"

$ statsd-exporter-convert example.conf
mappings:
- match: test.dispatcher.*.*.*
  name: dispatcher_events_total
  labels:
    action: $2
    job: test_dispatcher
    outcome: $3
    processor: $1
- match: '*.signup.*.*'
  name: signup_events_total
  labels:
    job: ${1}_server
    outcome: $3
    provider: $2

Using Docker

You can deploy this exporter using the prom/graphite-exporter Docker image.

For example:

docker pull prom/graphite-exporter

docker run -d -p 9108:9108 -p 9109:9109 -p 9109:9109/udp \
        -v ${PWD}/graphite_mapping.conf:/tmp/graphite_mapping.conf \
        prom/graphite-exporter --graphite.mapping-config=/tmp/graphite_mapping.conf

igabriel85 / graphite_exporter