OpenCore-Gigabyte-Z390M-Gaming

Please move on to BenjaminX's project

An OpenCore config of hackintosh, about Gigabyte Z390M Gaming.

You can see my change log here.

Both iGPU and eGPU are working fine.
NATIVE NVRAM is working! I can change my Startup Disk in System Preference. thanks to acidanthera SSDT-PMC, now LogoutHook.command is unnecessary.
BlueTooth and Wi-Fi are working fine, because of I brought it on purpose.
USBs are working fine, I patch it with USBPorts.kext, thanks to hackintool, you can see my configuration
High Speed USB Charge also working, enable by USBPower.kext.
Sleep is fine, thanks to Gigabyte Z390M Gaming, it really saved my time.

MAKE SURE YOUR BIOS VERSION HAVE UPDATED TO VERSION F9m! NOW CFG-LOCK CAN BE DISABLE MANUALLY!

Save & Exit
- Load Optimized Defaults then make (or confirm) the following settings -- important settings in bold:
Setting modify

Tweaker
- Advanced CPU Settings
  - VT-d → Disabled
- Extreme Memory Profile(X.M.P.) → Profile 1
Settings
- Platform Power
  - Platform Power Management → Disabled
  - ErP → Disabled
- CSM Support → Disable
  - Secure Boot will be disabled by default, but good to check
- IO Ports
  - Initial Display Output → PCIe Slot 1. (If your discrete graphics card is in Slot 2, change this appropriately.)
  - Internal Graphics → Enabled
  - Above 4G Decoding → Enabled
  - Resize BAR Support → Disabled
  - Super IO Configuration
    - Serial Port → Disabled
  - USB Configuration
    - XHCI Hand-off → Enabled
    - Legacy USB Support → Enabled
    - USB Mass Storage Driver Support → Enabled
    - Port 60/64 Emulation → Disabled
  - Network Stack Configuration
    - Network Stack → Disabled
- Miscellaneous
  - Intel Platform Trust Technology(PTT) → Disabled
  - Software Guard Extensions(SGX) → Disabled
Boot
- CFG Lock → Disabled (This is VERY VERY IMPORTANT)
- Windows 8/10 Features → Other OS
- CSM Support → Disable
- Secure Boot → Disable

USB3.0 is active by kexts/Other/USBPorts.kext. USBInjectALL.kext is unnecessary.