TelloSDKPy

DJI Tello drone python interface using the official Tello SDK. Yes, this library has been tested with the drone. Please see example.py for a working example controlling the drone as a remote controller with the keyboard and the video stream in a window.

Tested with Python 3.6, but it also may be compatabile with other versions.

Install

$ pip install djitellopy

$ git clone https://github.com/damiafuentes/TelloSDKPy.git
$ cd DJITelloPy
$ pip install -r requirements.txt

Usage

Simple example

from djitellopy import Tello
import cv2
import time

tello = Tello()

tello.connect()
tello.takeoff()

tello.move_left(100)
tello.rotate_counter_clockwise(45)

tello.land()
tello.end()

Swarm example

from djitellopy import TelloSwarm

swarm = TelloSwarm.fromIps([
    "192.168.178.42",
    "192.168.178.43",
    "192.168.178.44"
])

swarm.connect()
swarm.takeoff()

# run in parallel on all tellos
swarm.move_up(100)

# run by one tello after the other
swarm.sequential(lambda i, tello: tello.move_forward(i * 20))

# making each tello do something unique in parallel
swarm.parallel(lambda i, tello: tello.move_left(i * 100))

swarm.land()
swarm.end()

Example using pygame and the video stream

Please see example.py.

The controls are:

T: Takeoff
L: Land
Arrow keys: Forward, backward, left and right.
A and D: Counter clockwise and clockwise rotations
W and S: Up and down.

Notes

If you are using the streamon command and the response is Unknown command means you have to update the Tello firmware. That can be done through the Tello app.
Mission pad detection and navigation is only supported by the Tello EDU
Connecting to an existing wifi network is only supported by the Tello EDU
When connected to an existing wifi network video streaming is not available

Author

Damià Fuentes Escoté

License

This project is licensed under the MIT License - see the LICENSE.md file for details

hyansuper / DJITelloPy