Parallaxify
add depth to your project
parallaxify is a jQuery plugin that adds parallax effects to elements and backgrounds based on gyroscope sensor (device orientation) data or mouse movement. Due to the recent hype started due to the introduction of a parallax effect in iOS 7, I created a plugin that allows anyone to easily incorporate parallax effects to their websites.
Demos
Download
Get the minified version or the source here.
Get things going
In order to add a parallax effect to any element you can run .parallaxify()
on the wrapper of an element or run it globally on 'window':
// Run it on single element
$('#my-wrapper').parallaxify();
// or globally
$.parallaxify();
You can also run .parallaxify()
on the fly, e.g. for hover effects and destroy the instance on blur using the built-in destroy method (Thanks to matlembo for pointing out the following example - see #2 ):
$('#my-element').hover(
function(){
$(this).parallaxify(args);
},
function(){
$(this).parallaxify('destroy');
}
);
The horizontal and vertical distances that each element can or should travel can be defined through attributes as follows:
<div data-parallaxify-range-x="100" data-parallaxify-range-y="50"></div>
You can also use the shorthand attribute data-parallaxify-range
to set x and y range with one setting. In a similar way you can set backgrounds to reposition based on the input.
<div data-parallaxify-background-range="100"></div>
All available attributes:
data-parallaxify-range
data-parallaxify-range-x
data-parallaxify-range-y
data-parallaxify-background-range
data-parallaxify-background-range-x
data-parallaxify-background-range-y
Fine tuning the plugin
parallaxify exposes a variety of options that let you influence how element positioning is achieved, configure filtering of sensor data, configure the movement algorithm, and change general plugin settings.
These are all settings that can be configured as part of the plugin:
$.parallaxify({
// enable parallax effect for horizontal, vertical or both directions
horizontalParallax: true,
verticalParallax: true,
// enable or disable parallax effect for elements or backgrounds
parallaxBackgrounds: true,
parallaxElements: true,
// set which positioning property is to be used
// options include 'position' or 'transform' using css transformations
positionProperty: 'position',
// enable for responsive layouts
// (upon orientation changes or window resizing element positions are reevaluated
responsive: false,
// enable or disable mouse or gyroscope data as input for the plugin
useMouseMove: true,
useGyroscope: true,
// use a Low Pass Filter to smooth sensor readings (1 = no filter)
alphaFilter: 0.9,
// set which motion type algorithm is to be used
// options include 'natural', 'linear', 'gaussian', or 'performance'
motionType: 'natural',
mouseMotionType: 'gaussian',
// define which sensor input has priority over the other
// options are either 'mouse' or 'gyroscope'
inputPriority: 'mouse',
// define the delta angle (0 < motionAngle < 90)
// that is used to render max parallax in this direction
motionAngleX: 80,
motionAngleY: 80,
// enable of adjustment of base position (using a Low Pass Filter)
// (adapting to device usage while plugin is running)
adjustBasePosition: true,
// alpha for Low Pass Filter used to adjust average position
alphaPosition: 0.05,
});
Positioning
parallaxify allows you to control how elements are repositioned. Out of the box you can choose between positioning via top: 0px; left: 0px
properties or CSS3 transformations. You can also extend this by writing your function.
// enable parallaxify with CSS3 transformations for positioning
$('#element').parallaxify({
positionProperty: 'transform'
});
// defining your own positioning function
$.parallaxify.positionProperty.rotate = {
setPosition: function($element, left, originalLeft, top, originalTop) {
$element.css('transform', 'rotateX(' + left + 'deg) rotateY(' + top + 'deg)');
}
};
// using your own positioning function
$('#other').parallaxify({
positionProperty: 'rotate'
});
Motion algorithms
In order to control how the input data (i.e. the mouse movement or the gyroscope sensor data) influences the repositioning of the elements and backgrounds you can use one of the pre-defined motionType
or write your own algorithm. motionType
and mouseMotionType
allow you to configure the behavior for gyroscope and mouse input separately.
linear
algorithm Nothing more to say. The elements are repositioned linearly with the movement, reaching the maximum displacement at the definedmotionAngleX
andmotionAngleY
maximum angles (and remain at that position beyond these angles);natural
algorithm Natural movment uses a tangent function to calulate the repositioning. This is your number one choice if you want to create an effect similar to the iOS 7 home screen. Remember to set the maximum angles (motionAngleX
andmotionAngleY
) accordingly. Good choices here are probably80
for both. Keep in mind that if you set the angles too low, that the movement will stop at these angles.gaussian
algorithm Here we use an approximation to the Gaussian Cumulative Distribution function (short CDF). The displacement is large at small angles (or mouse movements at the screen center) and is almost unnoticeable at large angles (or mouse movements close to the screen border).performance
algorithm An approximation to the tangent function that is intended to speed up calculation in javascript and hence have a slightly better performance
Similarly to the positioning you can write your own function to fit your needs:
// enable parallaxify with natural motion (based on sensor data) and the gaussian algorithm for mouse movement
$('#element').parallaxify({
motionType: 'natural',
mouseMotionType: 'gaussian'
});
// defining your own motion type
// example for linear motion
$.parallaxify.motionType.linear = {
function(delta, deltaMax) {
if (delta <= -deltaMax) return 1;
if (delta >= deltaMax) return -1;
return -delta/deltaMax;
}
};
// using the linear positioning function
$('#other').parallaxify({
positionProperty: 'linear'
});
The following graph plots the linear
(blue), natural
(red), and gaussian
(green) alogrithm for motionAngleX: 85
:
License
Released under the MIT license. http://hwthorn.mit-license.org
Thanks
Having seen Mark Dalgleish' parallax scrolling plugin stellar.js I got inspired and built parallaxify based on his plugin.