huiyiqun / device_coolpad_cp5310

Device file for compiling a CWM Recovery for coolpad 5310

device coolpad cp5310

HOWTO

1. Init Cyanogenmod with repo. cm-11.0 needed.

   $ repo init -u git://github.com/CyanogenMod/android.git -b cm-11.0
   

2. Edit .repo/manifest.xml and add the following section:

   <project path="device/coolpad/cp5310" name="huiyiqun/device_coolpad_cp5310" />
   

   If you are in China, I'll advice you to use AOSP Mirror of TUNA to replace the repo of Google.

3. Get Source:

   $ repo sync
   

4. Apply patch:

   $ cd bootable/recovery/
   $ patch -p1 < ../../device/coolpad/cp5310/bootable_reocvery.diff
   

5. Download msm_ion.h and msm_mdp.h from the forum page or any other place you like. For the reason of license, I don't want to place it in my repo. Then place they under bootable/recovery/minui/linux/. You have to create the directory first.

6. Make:

   $ cd ../../
   $ bash # If you are using other shell, i.e. zsh
   $ . build/envsetup.sh
   $ lunch cm_cp5310-eng
   $ make recoveryimage
   

   you can see the $RECOVERY_PATH at the end of output.

7. Enjoy the CWM Recovery, boot into fastboot mode by powering off and pluging in USB cable with Volume down pressed, and then:

   $ sudo fastboot boot $RECOVERY_PATH
   

   If it looks well, flash it in fastboot mode:

   $ sudo fastboot flash reocvery $RECOVERY_PATH
   

THANKS

I tried to port cwm to my Android devices several times before, but all ended with failure. This is the first time I get it.

The XDA University has given me a nice begin. However it's far from success.

Then the Forum Page help me a lot, although many parameters it mentioned is useless.