huerli / buildroot-d1x-t113

Buildroot Package for MQ MQ-Dual MQ-R ( d1s/t113 )

Buildroot MangoPi-MQ

Buildroot Package for MangoPi-MQ Devices. Support Allwinner D1-H D1s T113

---

Vendor	Device	Chip	U-Boot	Linux	Defconfig
YuzukiHD	YuzukiRuler	F1C200s	2020.07	5.4.180	yuzukihd_yuzukiruler_defconfig
YuzukiHD	YuzukiCore F1	F1C200s	2020.07	5.4.180	yuzukihd_yuzukicore_f1_defconfig
YuzukiHD	YuzukiCK1N	V3x	2022.01	5.4.180	yuzukihd_yuzukick1n_defconfig
YuzukiHD	R11 86 Panel	R11	2022.01	5.4.180	yuzukihd_r11_86panel_defconfig
Awol	Nezha	D1-H	Tina UBoot 2018	Tina Linux 5.4.61	awol_nezha_defconfig
Awol	Nezha-D1s	D1s	Tina UBoot 2018	Tina Linux 5.4.61	awol_nezha_d1s_defconfig
MangoPi	MQ	D1s	Tina UBoot 2018	Tina Linux 5.4.61	mangopi_mq_defconfig
MangoPi	MQ Dual	T113	longan UBoot 2018	longan Linux 5.4.61	mangopi_mq_dual_defconfig
MangoPi	MQ Pro	D1-H	Tina UBoot 2018	Tina Linux 5.4.61	mangopi_mq_pro_defconfig

---

Fork Tree

   Tiny200   

   ⤷ MangoPi-R   

    ⤷ YuzukiSBC        ⤷ MangoPiSBC   

---

About Buildroot

Buildroot is a simple, efficient and easy-to-use tool to generate embedded
Linux systems through cross-compilation.

The Online documentation can be found at http://buildroot.org/docs.html

Build dependencies:

1) sudo apt-get update
2) sudo apt-get install rsync wget unzip build-essential git bc swig libncurses-dev libpython3-dev libssl-dev python3-distutils android-tools-mkbootimg mtools
 -y

Build source, do the following:

1) source envsetup.sh
2) lunch
3) make mangopi_xxx_defconfig
4) make
5) wait while it compiles
6) find the kernel, bootloader, root filesystem, etc. in output/images

Tips

1) You do not need to be root to build or run buildroot.  Have fun!
2) "mkernel" for build or rebuild linux kernel and dts
3) "muboot" for build or rebuild uboot
4) "m" for make
5) "sync_kernel","sync_uboot" for resync the source code
6) "sconfig" for save buildroot config
7) "skernel" for save linux config
8) "suboot" for save uboot config