uModbus or (μModbus) is a pure Python implementation of the Modbus protocol as described in the MODBUS Application Protocol Specification V1.1b3. uModbus implements both a Modbus client (both TCP and RTU) and a Modbus server (both TCP and RTU). The "u" or "μ" in the name comes from the the SI prefix "micro-". uModbus is very small and lightweight. The source can be found on GitHub. Documentation is available at Read the Docs.
Creating a Modbus TCP server is easy:
#!/usr/bin/env python
# scripts/examples/simple_tcp_server.py
import logging
from socketserver import TCPServer
from collections import defaultdict
from umodbus import conf
from umodbus.server.tcp import RequestHandler, get_server
from umodbus.utils import log_to_stream
# Add stream handler to logger 'uModbus'.
log_to_stream(level=logging.DEBUG)
# A very simple data store which maps addresss against their values.
data_store = defaultdict(int)
# Enable values to be signed (default is False).
conf.SIGNED_VALUES = True
TCPServer.allow_reuse_address = True
app = get_server(TCPServer, ('localhost', 502), RequestHandler)
@app.route(slave_ids=[1], function_codes=[3, 4], addresses=list(range(0, 10)))
def read_data_store(slave_id, function_code, address):
"""" Return value of address. """
return data_store[address]
@app.route(slave_ids=[1], function_codes=[6, 16], addresses=list(range(0, 10)))
def write_data_store(slave_id, function_code, address, value):
"""" Set value for address. """
data_store[address] = value
if __name__ == '__main__':
try:
app.serve_forever()
finally:
app.shutdown()
app.server_close()Doing a Modbus request requires even less code:
#!/usr/bin/env python
# scripts/examples/simple_tcp_client.py
import socket
from umodbus import conf
from umodbus.client import tcp
# Enable values to be signed (default is False).
conf.SIGNED_VALUES = True
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
sock.connect(('localhost', 502))
# Returns a message or Application Data Unit (ADU) specific for doing
# Modbus TCP/IP.
message = tcp.write_multiple_coils(slave_id=1, starting_address=1, values=[1, 0, 1, 1])
# Response depends on Modbus function code. This particular returns the
# amount of coils written, in this case it is.
response = tcp.send_message(message, sock)
sock.close()The following functions have been implemented for Modbus TCP and Modbus RTU:
- 01: Read Coils
- 02: Read Discrete Inputs
- 03: Read Holding Registers
- 04: Read Input Registers
- 05: Write Single Coil
- 06: Write Single Register
- 15: Write Multiple Coils
- 16: Write Multiple Registers
Other featues:
- Support for signed and unsigned register values.
uModbus software is licensed under Mozilla Public License. © 2018 Advanced Climate Systems.