home-climate-control / dz

Home Climate Control Core: *the* Open Source multi-zone temperature and climate control system.

http://homeclimatecontrol.com/

home-climate-control/dz Issues

Economizer sample telemetry is not emitted when indoor temperature falls below target
Updated 2 months ago
Implement a command line tool
Updated 3 months ago
Remove behavior from ZoneSettings
Closed 4 months ago1
Remove duplicate EconomizerSettings
Closed 4 months ago1
Allow the schedule to specify a setpoint range
Updated 4 months ago
Implement RSocket communicator
Updated 4 months ago
Implement platform specific build for jibDockerBuild task
Updated 4 months ago
Google Calendar event change doesn't get picked up
Updated 4 months ago
Eliminate control input lag
Closed 5 months ago1
Make Thermostat PID controller configuration values HVAC mode independent
Updated 5 months ago
Allow ProcessController to exist without a setpoint
Closed 6 months ago
Propagate error signal further in process control pipeline
Closed 6 months ago
Economizer runs forever when there is an ambient sensor failure
Closed 7 months ago1
Add economizer settings to Zone visualization
Closed 8 months ago1
Application hangs on not quite resolved configuration
Closed 8 months ago1
"Off schedule" indicator always indicates true
Closed 8 months ago
Augment calendar schedule period definition with entities that came to existence since its creation
Closed 8 months ago1
Provide a system wide way to specify measurement units
Updated 8 months ago
last-imperative-maintenace branch fails to build because of owapi-reborn
Closed 9 months ago1
Migrate submodule builds to a Composite Build
Closed 9 months ago1
last-imperative-maintenace branch fails to build on JDK17
Closed 9 months ago1
Adjust signal pipeline so that variable output and multistage devices can be fully utilized
Updated 9 months ago
Review dependency management
Closed 9 months ago1
Enforce uniform coding style
Closed 9 months ago2
Review memory footprint correlated with dependency upgrades
Closed 9 months ago1
Syntax error in a resource usage counter renders the system inoperable
Closed 10 months ago
Implement Gradle version catalog
Closed a year ago
Simplify project directory layout
Closed a year ago
Invalid Zigbee2MQTT payload causes a cascading failure
Closed a year ago1
"Invalid modes mode: heat" in Home Assistant log
Updated a year ago
Replace obsolete JVM source/target syntax with current
Closed a year ago
Port the raise() logic from imperative to reactive code
Closed a year ago1
Create the discovery packet to expose the configuration to human UI applications
Closed a year ago1
Make the service locally discoverable
Closed a year ago1
MQTT devices relying on retained messages may not work correctly
Closed a year ago1
Multiple ESPHome logical devices per physical device will report "available" only for one random
Closed a year ago
Implement "reset usage counter" operation in Reactive Console
Updated a year ago
Decouple possibly faulty actuators from control logic so that the processing pipeline doesn't get stuck
Closed a year ago1
Implement variable output single mode HVAC device
Closed a year ago
Economizer: control a HVAC device, not a switch
Closed a year ago
"Sticky" sensors confuse economizer process control logic
Closed a year ago1
Support "optimistic" switches
Closed a year ago
Make usage information an integral part of HVAC device status
Updated a year ago
Backport usage counters from imperative to reactive code base
Closed a year ago
Provide Home Assistant Climate integration
Closed a year ago2
Clean up and update documentation to make the reactive branch the trunk
Closed a year ago
Late night brown bag thread safety violation
Closed a year ago
Refactor schedule consumption to be really reactive
Closed a year ago1
Sonar nagging about nullability
Closed a year ago2
Figure out why Flux.delayElements() and Mono.delayElement() break the HeatPump
Updated a year ago