LoRa Basic Modem proposes an full implementation of the TS001-LoRaWAN L2 1.0.4 and Regional Parameters RP2-1.0.3 specifications.
LoRa Basic Modem embedds also an implementation of all LoRaWAN packages dedicated to Firmware Update Over The Air (FUOTA):
- Application Layer Clock Synchronization (ALCSync)
- Remote Multicast Setup
- Fragmented Data Block Transport
- Firmware Management Protocol (FMP)
- Multi-Package Access (MPA)
LoRa Basic Modem offers extended services:
- LoRaWAN certification process
- Geolocation with LoRa Edge chips
- LoRaCloud features such as Stream, Large File Upload, Device Management or Almanac Update
LBM library code can be found in folder lbm_lib.
Please refer to README.md to get all information related to LoRa Basics Modem library
Under lbm_examples folder, one will find a few examples on how to use the LoRa Basics Modem stack.
- Hardware Modem (Implements a hardware modem controlled by a serial interface)
- Periodical uplink (joins the network and then sends periodic uplinks and each time the button is pushed)
- Porting tests (Allows to verify if the project porting process is correct)
- LCTT certification (to run LoRaWAN certification)
The examples are targeted for the NucleoL476 kit featuring an STM32L476 micro-controller.
For further details please refer to lbm_examples directory README file.
To build the periodical uplink example targeting the LR1110 Semtech radio the following should be executed on the command line:
make -C lbm_examples full_lr1110 MODEM_APP=PERIODICAL_UPLINKUnder lbm_applications folder, one will find 3 specific applications that are using LoRa Basics Modem stack.
- A ThreadX Operationg System running on STM32U5 (lbm_applications/1_thread_x_on_stm32_u5/README.md)
- A LBM porting on Nordic NRF52840 (lbm_applications/2_porting_nrf_52840/README.md)
- A Geolocation application running on Lora Edge (lbm_applications/3_geolocation_on_lora_edge/README.md)