hi-a / fuji-cam-wifi-tool

Trying to reverse-engineer the Fuji X-T10 wifi remote control protocol

fuji-cam-wifi-tool

Trying to reverse-engineer the Fuji X-T10 wifi remote control protocol

Build instructions

Mac OS X, Linux, Windows

mkdir fuji-tool
cd fuji-tool
git clone https://github.com/hkr/fuji-cam-wifi-tool
git -C fuji-cam-wifi-tool submodule update --init --recursive
mkdir build
cd build
cmake ../fuji-cam-wifi-tool
cmake --build .

Run the tool

The tool fuji_cam_wifi_tool is an interactive shell (based on linenoise) that can be used to send commands to the camera. At this time it is very limited and mostly undocumented. Supported commands are connect, shutter, stream, info, set_iso, aperture, white_balance, shutter_speed. I suggest to look at the code.

Mac OS X:

./tool/fuji_cam_wifi_tool

Steps to connect the tool to the camera:

• Press the "Wireless Communication" button on the X-T10
• Connect your computer to the camera's Wifi Access Point (in ad-hoc mode)
• Send the connect command.
• Press the OK (Change) button (only needed the first time, fuji_cam_wifi_tool connects as "HackedClient", see main.cpp)
• On success the tool should print a lot of debug data and the current camera settings
• Try taking a picture by sending "shutter"