henols / qnap-letsencrypt

Let's Encrypt on QNAP

Let's Encrypt on QNAP

Install Instructions

NAS Setup

1. Make sure your NAS is reachable from the public internet under the domain you want to get a certificate for on port 80.

   If you use port forwarding, forward port 80 of the internet side of the router to port 80 on the nas.

2. Create a folder to store qnap-letsencrypt in under /share/YOUR_DRIVE/. Do not create it directly in /share/, as it will be lost after a reboot!

Installing git and python

1. Install entware.
2. Install git: opkg install git git-http
3. Install python: opkg install python3

If you don't want to install entware, you can also try the git / python packages from qnap store. However, these are often incomplete (for example: compiled without ssl or ipv6 support), so no support is provided if you don't use entware.

Setting up a valid ca-bundle and cloning this repo

By default, there is no ca-bundle (bundle of root certificates which we should trust) installed. Therefore we will have to download one manually.

1. On your local pc with an intact certificate store, run

   curl --silent https://curl.se/ca/cacert.pem | sha1sum
   

2. On your nas, in the directory you want to install qnap-letsencrypt in, run

   curl --silent --location --remote-name --insecure https://curl.haxx.se/ca/cacert.pem
   sha1sum cacert.pem
   

3. Compare the hashes obtained in step 1 and 2, they must match.

4. On your nas, in the directory you were in before

   git config --system http.sslVerify true
   git config --system http.sslCAinfo `pwd`/cacert.pem
   git clone https://github.com/Yannik/qnap-letsencrypt.git
   mv cacert.pem qnap-letsencrypt
   cd qnap-letsencrypt
   git config --system http.sslCAinfo `pwd`/cacert.pem
   

Setting up qnap-letsencrypt

1. Run init.sh

2. Create a Certificate Signing Request(csr):

   single domain cert: (replace nas.xxx.de with your domain name)

   openssl req -new -sha256 -key letsencrypt/keys/domain.key -subj "/CN=nas.xxx.de" > letsencrypt/domain.csr
   

   multiple domain cert: (replace nas.xxx.de and nas.xxx.com with your domain names)

   cp openssl.cnf letsencrypt/openssl-csr-config.cnf
   printf "subjectAltName=DNS:nas.xxx.de,DNS:nas.xxx.com" >> letsencrypt/openssl-csr-config.cnf
   openssl req -new -sha256 -key letsencrypt/keys/domain.key -subj "/" -reqexts SAN -config letsencrypt/openssl-csr-config.cnf > letsencrypt/domain.csr
   

3. mv /etc/stunnel/stunnel.pem /etc/stunnel/stunnel.pem.orig (backup)

4. Run renew_certificate.sh

5. account.key, domain.key and even the csr (according to acme-tiny readme) can be reused, so just create a cronjob to run renew_certificate.sh every night, which will renew your certificate if it has less than 30 days left

   Add this to /etc/config/crontab:

   30 3 * * * /share/CE_CACHEDEV1_DATA/qnap-letsencrypt/renew_certificate.sh >> /share/CE_CACHEDEV1_DATA/qnap-letsencrypt/renew_certificate.log 2>&1
   

   Then run:

   crontab /etc/config/crontab
   /etc/init.d/crond.sh restart
   

FAQ

Why is xxx not working after a reboot?

Anything that's added to one of the following directories is gone after a reboot:

• /root/ (.gitconfig, .bash_history)
• /share/ (with the exception of anything added to drives mounted there)
• /etc/ssl/, /etc/ssl/certs

Additionally, the following is not surviving a reboot:

• Cronjobs added using crontab -e

Note that qpkgs get installed to /share/CE_CACHEDEV1_DATA/.qpkg. Due to this they are only available after unlocking your disks encryption.

What is actually surving a reboot?

• Anything that is on a drive, e.g. /share/CE_CACHEDEV1_DATA/
• /etc/stunnel/stunnel.pem (the ssl certificate used for the webinterface) seems to survive a reboot

What about surviving an firmware update?

In my tests, all the above applied. I couldn't see anything additional being lost.

How to generate content of /etc/ssl/certs?

This is only documented as it was part of my research and is not needed for the letsencrypt certificate generation.

First, install Perl from the qnap app manager.

Then, in your qnap-letsencrypt directory:

mkdir certs
cat cacert.pem | awk 'split_after==1{n++;split_after=0} /-----END CERTIFICATE-----/ {split_after=1} {print > "certs/cert" n ".pem"}'
wget --ca-certificate cacert.pem https://raw.githubusercontent.com/ChatSecure/OpenSSL/master/tools/c_rehash
/opt/bin/perl c_rehash certs
export SSL_CERT_FILE=`pwd`/cacert.pem

You can now copy this to /etc/ssl/certs. Alternatively, you can do this directly in /etc/ssl/certs if you want to, but remember, that it is lost after a reboot.

How to test whether a python script fails due to missing ca certificates

from urllib.request import urlopen # Python 3
urlopen("https://google.com")

If you get this:

urllib2.URLError: <urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:581)>

there is something wrong.

Remember to run export SSL_CERT_FILE=cacert.pem though, as it is done in renew_certificates.sh

How can I contribute anything to this project?

Please open a pull request!

You want to buy me a coffee?

Feel free to send a donation this way: https://www.paypal.me/qnapletsencrypt

What license is this code licensed under?

GPLv2