GTMAppAuth enables you to use AppAuth
with the
Google Toolbox for Mac - Session Fetcher
and
Google APIs Client Library for Objective-C For REST
libraries by providing an implementation of GTMFetcherAuthorizationProtocol
for authorizing requests with AppAuth.
GTMAppAuth is an alternative authorizer to GTMOAuth2. The key differentiator is the use of the user's default browser for the authorization, which is more secure, more usable (the user's session can be reused) and follows modern OAuth best practices for native apps. Compatibility methods for GTMOAuth2 are offered allowing you to migrate from GTMOAuth2 to GTMAppAuth preserving previously serialized authorizations (so users shouldn't need to re-authenticate).
If you use CocoaPods, simply add:
pod 'GTMAppAuth'
To your Podfile and run pod install.
To configure GTMAppAuth with the OAuth endpoints for Google, you can use the convenience method:
OIDServiceConfiguration *configuration =
[GTMAppAuthFetcherAuthorization configurationForGoogle];Alternatively, you can configure GTMAppAuth by specifying the endpoints directly:
NSURL *authorizationEndpoint =
[NSURL URLWithString:@"https://accounts.google.com/o/oauth2/v2/auth"];
NSURL *tokenEndpoint =
[NSURL URLWithString:@"https://www.googleapis.com/oauth2/v4/token"];
OIDServiceConfiguration *configuration =
[[OIDServiceConfiguration alloc]
initWithAuthorizationEndpoint:authorizationEndpoint
tokenEndpoint:tokenEndpoint];
// perform the auth request...Or through discovery:
NSURL *issuer = [NSURL URLWithString:@"https://accounts.google.com"];
[OIDAuthorizationService discoverServiceConfigurationForIssuer:issuer
completion:^(OIDServiceConfiguration *_Nullable configuration,
NSError *_Nullable error) {
if (!configuration) {
NSLog(@"Error retrieving discovery document: %@",
[error localizedDescription]);
return;
}
// perform the auth request...
}];First, you need to have a way for your UIApplicationDelegate to continue the authorization flow session from the incoming redirect URI. Typically you could store the in-progress OIDAuthorizationFlowSession instance in a property:
// property of the app's UIApplicationDelegate
@property(nonatomic, nullable)
id<OIDExternalUserAgentSession> currentAuthorizationFlow;And in a location accessible by all controllers that need authorization, a property to store the authorization state:
// property of the containing class
@property(nonatomic, nullable) GTMAppAuthFetcherAuthorization *authorization;Then, initiate the authorization request. By using the
authStateByPresentingAuthorizationRequest method, the OAuth token
exchange will be performed automatically, and everything will be protected with
PKCE (if the server supports it).
// builds authentication request
OIDAuthorizationRequest *request =
[[OIDAuthorizationRequest alloc] initWithConfiguration:configuration
clientId:kClientID
clientSecret:kClientSecret
scopes:@[OIDScopeOpenID, OIDScopeProfile]
redirectURL:redirectURI
responseType:OIDResponseTypeCode
additionalParameters:nil];
// performs authentication request
self.appDelegate.currentAuthorizationFlow =
[OIDAuthState authStateByPresentingAuthorizationRequest:request
callback:^(OIDAuthState *_Nullable authState,
NSError *_Nullable error) {
if (authState) {
// Creates the GTMAppAuthFetcherAuthorization from the OIDAuthState.
GTMAppAuthFetcherAuthorization *authorization =
[[GTMAppAuthFetcherAuthorization alloc] initWithAuthState:authState];
self.authorization = authorization;
NSLog(@"Got authorization tokens. Access token: %@",
authState.lastTokenResponse.accessToken);
} else {
NSLog(@"Authorization error: %@", [error localizedDescription]);
self.authorization = nil;
}
}];The authorization response URL is returned to the app via the platform-specific application delegate method, so you need to pipe this through to the current authorization session (created in the previous session).
- (void)applicationDidFinishLaunching:(NSNotification *)aNotification {
// Other app initialization code ...
// Register for GetURL events.
NSAppleEventManager *appleEventManager =
[NSAppleEventManager sharedAppleEventManager];
[appleEventManager setEventHandler:self
andSelector:@selector(handleGetURLEvent:withReplyEvent:)
forEventClass:kInternetEventClass
andEventID:kAEGetURL];
}
- (void)handleGetURLEvent:(NSAppleEventDescriptor *)event
withReplyEvent:(NSAppleEventDescriptor *)replyEvent {
NSString *URLString = [[event paramDescriptorForKeyword:keyDirectObject] stringValue];
NSURL *URL = [NSURL URLWithString:URLString];
[_currentAuthorizationFlow resumeExternalUserAgentFlowWithURL:URL];
}- (BOOL)application:(UIApplication *)app
openURL:(NSURL *)url
options:(NSDictionary<NSString *, id> *)options {
// Sends the URL to the current authorization flow (if any) which will
// process it if it relates to an authorization response.
if ([_currentAuthorizationFlow resumeExternalUserAgentFlowWithURL:url]) {
_currentAuthorizationFlow = nil;
return YES;
}
// Your additional URL handling (if any) goes here.
return NO;
}The goal of GTMAppAuth is to enable you to authorize HTTP requests with fresh tokens following the Session Fetcher pattern, which you can do like so:
// Creates a GTMSessionFetcherService with the authorization.
// Normally you would save this service object and re-use it for all REST API calls.
GTMSessionFetcherService *fetcherService = [[GTMSessionFetcherService alloc] init];
fetcherService.authorizer = self.authorization;
// Creates a fetcher for the API call.
NSURL *userinfoEndpoint = [NSURL URLWithString:@"https://www.googleapis.com/oauth2/v3/userinfo"];
GTMSessionFetcher *fetcher = [fetcherService fetcherWithURL:userinfoEndpoint];
[fetcher beginFetchWithCompletionHandler:^(NSData *data, NSError *error) {
// Checks for an error.
if (error) {
// OIDOAuthTokenErrorDomain indicates an issue with the authorization.
if ([error.domain isEqual:OIDOAuthTokenErrorDomain]) {
self.authorization = nil;
NSLog(@"Authorization error during token refresh, clearing state. %@",
error);
// Other errors are assumed transient.
} else {
NSLog(@"Transient error during token refresh. %@", error);
}
return;
}
// Parses the JSON response.
NSError *jsonError = nil;
id jsonDictionaryOrArray =
[NSJSONSerialization JSONObjectWithData:data options:0 error:&jsonError];
// JSON error.
if (jsonError) {
NSLog(@"JSON decoding error %@", jsonError);
return;
}
// Success response!
NSLog(@"Success: %@", jsonDictionaryOrArray);
}];You can easily serialize GTMAppAuthFetcherAuthorization objects using the
included Keychain category.
// Serialize to Keychain
[GTMAppAuthFetcherAuthorization saveAuthorization:_authorization
toKeychainForName:kGTMAppAuthExampleAuthorizerKey];
// Deserialize from Keychain
GTMAppAuthFetcherAuthorization* authorization =
[GTMAppAuthFetcherAuthorization authorizationFromKeychainForName:kGTMAppAuthExampleAuthorizerKey];
// Remove from Keychain
[GTMAppAuthFetcherAuthorization
removeAuthorizationFromKeychainForName:kGTMAppAuthExampleAuthorizerKey];To assist the migration from GTMOAuth2 to GTMAppAuth, GTMOAuth2-compatible
serialization methods are provided in GTMOAuth2KeychainCompatibility.
// Deserialize from Keychain
GTMAppAuthFetcherAuthorization *auth =
[GTMOAuth2KeychainCompatibility authForGoogleFromKeychainForName:kKeychainItemName
clientID:clientID
clientSecret:clientSecret];
// Remove from Keychain
[GTMOAuth2KeychainCompatibility removeAuthFromKeychainForName:kKeychainItemName];You can also serialize to GTMOAuth2 format, though this is discouraged (you should serialize in GTMAppAuth format as described above).
// Serialize to Keychain
[GTMOAuth2KeychainCompatibility saveAuthToKeychainForName:kKeychainItemName
authentication:authorization];Try out one of the included sample apps under Examples. In the
apps folder run pod install, then open the resulting xcworkspace file.
Be sure to follow the instructions in Example-iOS/README.md or Example-macOS/README.md to configure your own OAuth client ID for use with the example.
GTMAppAuth uses the browser to present the authorization request, while
GTMOAuth2 uses an embedded web-view. Migrating to GTMAppAuth will require you
to change how you authorize the user. Follow the instructions above to get the
authorization. You can then create a GTMAppAuthFetcherAuthorization object
with the initWithAuthState:authState initializer.
Once you have the GTMAppAuthFetcherAuthorization you can continue to make REST
calls as before.
GTMAppAuth's error handling is also different. There are no notifications,
instead you need to inspect NSError in the callback. If the error domain is
OIDOAuthTokenErrorDomain, it indicates an authorization error, you should
clear your authorization state and consider prompting the user to authorize
again. Other errors are generally considered transient, meaning that you should
retry the request after a delay.
The serialization format is different between GTMOAuth2 and GTMAppAuth, though we have methods to help you migrate from one to the other without losing any data.
Typically, GTMOAuth2 clients are registered with Google as type "Other". This is correct for macOS, but on iOS clients should be registered with the type "iOS".
If you're migrating an iOS client, in the same project as your existing client, register a new iOS client to be used with GTMAppAuth.
Both GTMOAuth2 and GTMAppAuth support the GTMFetcherAuthorizationProtocol
allowing you to use the authorization with the session fetcher. Where you
previously had a property like GTMOAuth2Authentication *authorization change the
type to reference the protocol instead, i.e.:
id<GTMFetcherAuthorizationProtocol> authorization. This allows you to switch
the authorization implementation under the hood to GTMAppAuth.
Then, follow the instructions above to replace authorization request (where you ask the user to grant access) with the GTMAppAuth approach. If you created a new OAuth client, use that for these requests.
GTMAppAuth has a new data format and APIs for serialization. Unlike GTMOAuth2, GTMAppAuth serializes the configuration and history of the authorization, including the client id, and a record of the authorization request that resulted in the authorization grant.
The client ID used for GTMAppAuth is different to the one used for GTMOAuth2. In order to keep track of the different client ids used for new and old grants, it's recommended to migrate to the new serialization format, which will store that for you. GTMOAuth2-compatible serialization is also offered, but not fully supported.
Change how you serialize your authorization object using the new methods
using the following example.
// Serialize to Keychain
[GTMAppAuthFetcherAuthorization saveAuthorization:(GTMAppAuthFetcherAuthorization *)authorization
toKeychainForName:kNewKeychainName];Be sure to use a new name for the keychain. Don't reuse your old one!
For deserializing, we can preserve all existing grants (so users who authorized your app in GTMOAuth2 don't have to authorize it again). Remember that when deserializing the old data you need to use your old keychain name, and the old client id and client secret (if those changed), and that when serializing to the new format, use the new keychain name. Once again, pay particular care to use the old details when deserializing the GTMOAuth2 keychain, and the new details for all other GTMAppAuth calls.
Keychain migration example:
// Attempt to deserialize from Keychain in GTMAppAuth format.
id<GTMFetcherAuthorizationProtocol> authorization =
[GTMAppAuthFetcherAuthorization authorizationFromKeychainForName:kNewKeychainName];
// If no data found in the new format, try to deserialize data from GTMOAuth2
if (!authorization) {
// Tries to load the data serialized by GTMOAuth2 using old keychain name.
// If you created a new client id, be sure to use the *previous* client id and secret here.
authorization =
[GTMOAuth2KeychainCompatibility authForGoogleFromKeychainForName:kPreviousKeychainName
clientID:kPreviousClientID
clientSecret:kPreviousClientSecret];
if (authorization) {
// Remove previously stored GTMOAuth2-formatted data.
[GTMOAuth2KeychainCompatibility removeAuthFromKeychainForName:kPreviousKeychainName];
// Serialize to Keychain in GTMAppAuth format.
[GTMAppAuthFetcherAuthorization saveAuthorization:(GTMAppAuthFetcherAuthorization *)authorization
toKeychainForName:kNewKeychainName];
}
}