- Installation
- sudo
- SSH
- User Management
- cron
- Bonus
At the time of writing, the latest stable version of Debian is Debian 10 Buster. Watch bonus installation walkthrough (no audio) here.
Switch to root and its environment via su -.
$ su -
Password:
#
Install sudo via apt install sudo.
# apt install sudo
Verify whether sudo was successfully installed via dpkg -l | grep sudo.
# dpkg -l | grep sudo
Add user to sudo group via adduser <username> sudo.
# adduser <username> sudo
Alternatively, add user to sudo group via
usermod -aG sudo <username>.# usermod -aG sudo <username>
Verify whether user was successfully added to sudo group via getent group sudo.
$ getent group sudo
reboot for changes to take effect, then log in and verify sudopowers via sudo -v.
# reboot
<--->
Debian GNU/Linux 10 <hostname> tty1
<hostname> login: <username>
Password: <password>
<--->
$ sudo -v
[sudo] password for <username>: <password>
From here on out, run root-privileged commands via prefix sudo. For instance:
$ sudo apt update
Configure sudo via sudo vi /etc/sudoers.d/<filename>. <filename> shall not end in ~ or contain ..
$ sudo vi /etc/sudoers.d/<filename>
To limit authentication using sudo to 3 attempts (defaults to 3 anyway) in the event of an incorrect password, add below line to the file.
Defaults passwd_tries=3
To add a custom error message in the event of an incorrect password:
Defaults badpass_message="<custom-error-message>"
To log all sudo commands to /var/log/sudo/<filename>:
$ sudo mkdir /var/log/sudo
<~~~>
Defaults logfile="/var/log/sudo/<filename>"
<~~~>
To archive all sudo inputs & outputs to /var/log/sudo/:
Defaults log_input,log_output
Defaults iolog_dir="/var/log/sudo"
To require TTY:
Defaults requiretty
To set sudo paths to /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin:
Defaults secure_path="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin"
Install openssh-server via sudo apt install openssh-server.
$ sudo apt install openssh-server
Verify whether openssh-server was successfully installed via dpkg -l | grep ssh.
$ dpkg -l | grep ssh
Configure SSH via sudo vi /etc/ssh/sshd_config.
$ sudo vi /etc/ssh/sshd_config
To set up SSH using Port 4242, replace below line:
13 #Port 22
with:
13 Port 4242
To disable SSH login as root irregardless of authentication mechanism, replace below line
32 #PermitRootLogin prohibit-password
with:
32 PermitRootLogin no
Check SSH status via sudo service ssh status.
$ sudo service ssh status
Alternatively, check SSH status via
systemctl status ssh.$ systemctl status ssh
Install ufw via sudo apt install ufw.
$ sudo apt install ufw
Verify whether ufw was successfully installed via dpkg -l | grep ufw.
$ dpkg -l | grep ufw
Enable Firewall via sudo ufw enable.
$ sudo ufw enable
Allow incoming connections using Port 4242 via sudo ufw allow 4242.
$ sudo ufw allow 4242
Check UFW status via sudo ufw status.
$ sudo ufw status
SSH into your virtual machine using Port 4242 via ssh <username>@<ip-address> -p 4242.
$ ssh <username>@<ip-address> -p 4242
Terminate SSH session at any time via logout.
$ logout
Alternatively, terminate SSH session via
exit.$ exit
Configure password age policy via sudo vi /etc/login.defs.
$ sudo vi /etc/login.defs
To set password to expire every 30 days, replace below line
160 PASS_MAX_DAYS 99999
with:
160 PASS_MAX_DAYS 30
To set minimum number of days between password changes to 2 days, replace below line
161 PASS_MIN_DAYS 0
with:
161 PASS_MIN_DAYS 2
To send user a warning message 7 days (defaults to 7 anyway) before password expiry, keep below line as is.
162 PASS_WARN_AGE 7
Secondly, to set up policies in relation to password strength, install the libpam-pwquality package.
$ sudo apt install libpam-pwquality
Verify whether libpam-pwquality was successfully installed via dpkg -l | grep libpam-pwquality.
$ dpkg -l | grep libpam-pwquality
Configure password strength policy via sudo vi /etc/pam.d/common-password, specifically the below line:
$ sudo vi /etc/pam.d/common-password
<~~~>
25 password requisite pam_pwquality.so retry=3
<~~~>
To set password minimum length to 10 characters, add below option to the above line.
minlen=10
To require password to contain at least an uppercase character and a numeric character:
ucredit=-1 dcredit=-1
To set a maximum of 3 consecutive identical characters:
maxrepeat=3
To reject the password if it contains <username> in some form:
reject_username
To set the number of changes required in the new password from the old password to 7:
difok=7
To implement the same policy on root:
enforce_for_root
Finally, it should look like the below:
password requisite pam_pwquality.so retry=3 minlen=10 ucredit=-1 dcredit=-1 maxrepeat=3 reject_username difok=7 enforce_for_root
Create new user via sudo adduser <username>.
$ sudo adduser <username>
Verify whether user was successfully created via getent passwd <username>.
$ getent passwd <username>
Verify newly-created user's password expiry information via sudo chage -l <username>.
$ sudo chage -l <username>
Last password change : <last-password-change-date>
Password expires : <last-password-change-date + PASS_MAX_DAYS>
Password inactive : never
Account expires : never
Minimum number of days between password change : <PASS_MIN_DAYS>
Maximum number of days between password change : <PASS_MAX_DAYS>
Number of days of warning before password expires : <PASS_WARN_AGE>
Create new user42 group via sudo addgroup user42.
$ sudo addgroup user42
Add user to user42 group via sudo adduser <username> user42.
$ sudo adduser <username> user42
Alternatively, add user to user42 group via
sudo usermod -aG user42 <username>.$ sudo usermod -aG user42 <username>
Verify whether user was successfully added to user42 group via getent group user42.
$ getent group user42
Configure cron as root via sudo crontab -u root -e.
$ sudo crontab -u root -e
To schedule a shell script to run every 10 minutes, replace below line
23 # m h dom mon dow command
with:
23 */10 * * * * sh /path/to/script
Check root's scheduled cron jobs via sudo crontab -u root -l.
$ sudo crontab -u root -l
Watch bonus installation walkthrough (no audio) here.
Install lighttpd via sudo apt install lighttpd.
$ sudo apt install lighttpd
Verify whether lighttpd was successfully installed via dpkg -l | grep lighttpd.
$ dpkg -l | grep lighttpd
Allow incoming connections using Port 80 via sudo ufw allow 80.
$ sudo ufw allow 80
Install mariadb-server via sudo apt install mariadb-server.
$ sudo apt install mariadb-server
Verify whether mariadb-server was successfully installed via dpkg -l | grep mariadb-server.
$ dpkg -l | grep mariadb-server
Start interactive script to remove insecure default settings via sudo mysql_secure_installation.
$ sudo mysql_secure_installation
Enter current password for root (enter for none): #Just press Enter (do not confuse database root with system root)
Set root password? [Y/n] n
Remove anonymous users? [Y/n] Y
Disallow root login remotely? [Y/n] Y
Remove test database and access to it? [Y/n] Y
Reload privilege tables now? [Y/n] Y
Log in to the MariaDB console via sudo mariadb.
$ sudo mariadb
MariaDB [(none)]>
Create new database via CREATE DATABASE <database-name>;.
MariaDB [(none)]> CREATE DATABASE <database-name>;
Create new database user and grant them full privileges on the newly-created database via GRANT ALL ON <database-name>.* TO '<username-2>'@'localhost' IDENTIFIED BY '<password-2>' WITH GRANT OPTION;.
MariaDB [(none)]> GRANT ALL ON <database-name>.* TO '<username-2>'@'localhost' IDENTIFIED BY '<password-2>' WITH GRANT OPTION;
Flush the privileges via FLUSH PRIVILEGES;.
MariaDB [(none)]> FLUSH PRIVILEGES;
Exit the MariaDB shell via exit.
MariaDB [(none)]> exit
Verify whether database user was successfully created by logging in to the MariaDB console via mariadb -u <username-2> -p.
$ mariadb -u <username-2> -p
Enter password: <password-2>
MariaDB [(none)]>
Confirm whether database user has access to the database via SHOW DATABASES;.
MariaDB [(none)]> SHOW DATABASES;
+--------------------+
| Database |
+--------------------+
| <database-name> |
| information_schema |
+--------------------+
Exit the MariaDB shell via exit.
MariaDB [(none)]> exit
Install php-cgi & php-mysql via sudo apt install php-cgi php-mysql.
$ sudo apt install php-cgi php-mysql
Verify whether php-cgi & php-mysql was successfully installed via dpkg -l | grep php.
$ dpkg -l | grep php
Install wget via sudo apt install wget.
$ sudo apt install wget
Download WordPress to /var/www/html via sudo wget http://wordpress.org/latest.tar.gz -P /var/www/html.
$ sudo wget http://wordpress.org/latest.tar.gz -P /var/www/html
Extract downloaded content via sudo tar -xzvf /var/www/html/latest.tar.gz.
$ sudo tar -xzvf /var/www/html/latest.tar.gz
Remove tarball via sudo rm /var/www/html/latest.tar.gz.
$ sudo rm /var/www/html/latest.tar.gz
Copy content of /var/www/html/wordpress to /var/www/html via sudo cp -r /var/www/html/wordpress/* /var/www/html.
$ sudo cp -r /var/www/html/wordpress/* /var/www/html
Remove /var/www/html/wordpress via sudo rm -rf /var/www/html/wordpress
$ sudo rm -rf /var/www/html/wordpress
Create WordPress configuration file from its sample via sudo cp /var/www/html/wp-config-sample.php /var/www/html/wp-config.php.
$ sudo cp /var/www/html/wp-config-sample.php /var/www/html/wp-config.php
Configure WordPress to reference previously-created MariaDB database & user via sudo vi /var/www/html/wp-config.php.
$ sudo vi /var/www/html/wp-config.php
Replace the below
23 define( 'DB_NAME', 'database_name_here' );^M
26 define( 'DB_USER', 'username_here' );^M
29 define( 'DB_PASSWORD', 'password_here' );^M
with:
23 define( 'DB_NAME', '<database-name>' );^M
26 define( 'DB_USER', '<username-2>' );^M
29 define( 'DB_PASSWORD', '<password-2>' );^M
Enable below modules via sudo lighty-enable-mod fastcgi; sudo lighty-enable-mod fastcgi-php; sudo service lighttpd force-reload.
$ sudo lighty-enable-mod fastcgi
$ sudo lighty-enable-mod fastcgi-php
$ sudo service lighttpd force-reload
Install FTP via sudo apt install vsftpd.
$ sudo apt install vsftpd
Verify whether vsftpd was successfully installed via dpkg -l | grep vsftpd.
$ dpkg -l | grep vsftpd
Allow incoming connections using Port 21 via sudo ufw allow 21.
$ sudo ufw allow 21
Configure vsftpd via sudo vi /etc/vsftpd.conf.
$ sudo vi /etc/vsftpd.conf
To enable any form of FTP write command, uncomment below line:
31 #write_enable=YES
To set root folder for FTP-connected user to /home/<username>/ftp, add below lines:
$ sudo mkdir /home/<username>/ftp
$ sudo mkdir /home/<username>/ftp/files
$ sudo chown nobody:nogroup /home/<username>/ftp
$ sudo chmod a-w /home/<username>/ftp
<~~~>
user_sub_token=$USER
local_root=/home/$USER/ftp
<~~~>
To prevent user from accessing files or using commands outside the directory tree, uncomment below line:
114 #chroot_local_user=YES
To whitelist FTP, add below lines:
$ sudo vi /etc/vsftpd.userlist
$ echo <username> | sudo tee -a /etc/vsftpd.userlist
<~~~>
userlist_enable=YES
userlist_file=/etc/vsftpd.userlist
userlist_deny=NO
<~~~>
FTP into your virtual machine via ftp <ip-address>.
$ ftp <ip-address>
Terminate FTP session at any time via CTRL + D.