Philips TV Ambilight+Hue (Switch) Component
A Switch component for automating the control of the Ambilight+hue setting on a Philips TV, this reveals the current status of the menu setting to Home Assistant, and allows for remote or automated toggling.
Installation
Option 1: (recommended)
This repository is compatible with the Home Assistant Community Store (HACS).
After installing HACS, install 'Philips Ambilight+Hue' from the store, and use the configuration.yaml
example below.
Option 2: (manual)
If you have already set up the Ambilight (Light) component, installing this component is very simple, copy the philips_ambilight+hue
directory into your config/custom_components/
directory,
enter the same username and password as for the ambilight component in the configuration.yaml, along with the IP of the TV, and restart home assistant:
If you have not setup any other Philips TV components, use the tool linked in the Ambilight (Light) component docs to obtain your username and password.
switch:
- platform: philips_ambilight+hue
name: Ambilight+Hue
host: 192.168.1.XXX
username: !secret philips_username
password: !secret philips_password
id: 2131230774 # ambilight_hue_off node id. Default is 2131230774, but some newer TVs use 2131230778 instead.
scan_interval: 5
If the component is not working, try setting 2131230778
as the id
in the config
note: there is often a noticeable lag between Home Assistant sending the request to toggle the setting, and receiving a status update from the API, for this reason, it is advised that you reduce your scan_interval
(in seconds) to suit your needs.