Python library for Mode-S message decoding. Support Downlink Formats (DF) are:
- Automatic Dependent Surveillance - Broadcast (ADS-B) (DF17)
- aircraft information that contains: ICAO address, position, altitude, velocity (ground speed), callsign, etc.
- Mode-S Elementary Surveillance (ELS) (DF4 and DF5).
- DF4: Altitude
- DF5: Squawk code
- Mode-S Enhanced Surveillance (EHS) (DF20 and DF21). Additional information in response to SSR interrogation, such as: true airspeed, indicated airspeed, mach number, wind, temperature, etc.
- DF20: Altitude
- DF21: Squawk code
- BDS 2,0 Aircraft identification
- BDS 2,1 Aircraft and airline registration markings
- BDS 4,0 Selected vertical intention
- BDS 4,4 Meteorological routine air report
- BDS 5,0 Track and turn report
- BDS 5,3 Air-referenced state vector
- BDS 6,0 Heading and speed report
Detailed manual on Mode-S decoding is published by the author, at: http://adsb-decode-guide.readthedocs.io
Checkout and contribute to this open source project at: https://github.com/junzis/pyModeS
API documentation at: http://pymodes.readthedocs.io
The easiest installation is to use pip:
pip install pyModeS
import pyModeS as pms
pms.df(msg) # Downlink Format
pms.crc(msg, encode=False) # Perform CRC or generate parity bit
pms.hex2bin(str) # Convert hexadecimal string to binary string
pms.bin2int(str) # Convert binary string to integer
pms.hex2int(str) # Convert hexadecimal string to integer
pms.gray2int(str) # Convert grey code to interger
pms.adsb.icao(msg)
pms.adsb.typecode(msg)
# typecode 1-4
pms.adsb.callsign(msg)
# typecode 5-8 (surface) and 9-18 (airborne)
pms.adsb.position(msg_even, msg_odd, t_even, t_odd, lat_ref=None, lon_ref=None)
pms.adsb.airborne_position(msg_even, msg_odd, t_even, t_odd)
pms.adsb.surface_position(msg_even, msg_odd, t_even, t_odd, lat_ref, lon_ref)
pms.adsb.position_with_ref(msg, lat_ref, lon_ref)
pms.adsb.airborne_position_with_ref(msg, lat_ref, lon_ref)
pms.adsb.surface_position_with_ref(msg, lat_ref, lon_ref)
pms.adsb.altitude(msg)
# typecode: 19
pms.adsb.velocity(msg) # handles both surface & airborne messages
pms.adsb.speed_heading(msg) # handles both surface & airborne messages
pms.adsb.surface_velocity(msg)
pms.adsb.airborne_velocity(msg)
Note: When you have a fix position of the aircraft, it is convenient to use position_with_ref() method to decode with only one position message (either odd or even). This works with both airborne and surface position messages. But the reference position shall be with in 180NM (airborne) or 45NM (surface) of the true position.
pms.els.icao(msg) # ICAO address
pms.els.df4alt(msg) # Altitude from any DF4 message
pms.ehs.df5id(msg) # Squawk code from any DF5 message
pms.ehs.icao(msg) # ICAO address
pms.ehs.df20alt(msg) # Altitude from any DF20 message
pms.ehs.df21id(msg) # Squawk code from any DF21 message
pms.ehs.BDS(msg) # Comm-B Data Selector Version
# for BDS version 2,0
pms.ehs.isBDS20(msg) # Check if message is BDS 2,0
pms.ehs.callsign(msg) # Aircraft callsign
# for BDS version 4,0
pms.ehs.isBDS40(msg) # Check if message is BDS 4,0
pms.ehs.alt40mcp(msg) # MCP/FCU selected altitude (ft)
pms.ehs.alt40fms(msg) # FMS selected altitude (ft)
pms.ehs.p40baro(msg) # Barometric pressure (mb)
# for BDS version 4,4
pms.ehs.isBDS44(msg, rev=False) # Check if message is BDS 4,4
pms.ehs.wind44(msg, rev=False) # wind speed (kt) and heading (deg)
pms.ehs.temp44(msg, rev=False) # temperature (C)
pms.ehs.p44(msg, rev=False) # pressure (hPa)
pms.ehs.hum44(msg, rev=False) # humidity (%)
# for BDS version 5,0
pms.ehs.isBDS50(msg) # Check if message is BDS 5,0
pms.ehs.roll50(msg) # roll angle (deg)
pms.ehs.trk50(msg) # track angle (deg)
pms.ehs.gs50(msg) # ground speed (kt)
pms.ehs.rtrk50(msg) # track angle rate (deg/sec)
pms.ehs.tas50(msg) # true airspeed (kt)
# for BDS version 5,3
pms.ehs.isBDS53(msg) # Check if message is BDS 5,3
pms.ehs.hdg53(msg) # magnetic heading (deg)
pms.ehs.ias53(msg) # indicated airspeed (kt)
pms.ehs.mach53(msg) # MACH number
pms.ehs.tas53(msg) # true airspeed (kt)
pms.ehs.vr53(msg) # vertical rate (fpm)
# for BDS version 6,0
pms.ehs.isBDS60(msg) # Check if message is BDS 6,0
pms.ehs.hdg60(msg) # heading (deg)
pms.ehs.ias60(msg) # indicated airspeed (kt)
pms.ehs.mach60(msg) # MACH number
pms.ehs.vr60baro(msg) # barometric altitude rate (ft/min)
pms.ehs.vr60ins(msg) # inertial vertical speed (ft/min)
To perform unit tests. First install tox
through pip, Then, run the following commands:
$ tox