Arduino IDE library for wm8978 codec on ESP32 mcu.
- Tested/works with a M5Stack Node.
#include <WM8978.h> /* https://github.com/CelliesProjects/wm8978-esp32 */
#include <Audio.h> /* https://github.com/schreibfaul1/ESP32-audioI2S */
/* M5Stack Node WM8978 I2C pins */
#define I2C_SDA 21
#define I2C_SCL 22
/* M5Stack Node I2S pins */
#define I2S_BCK 5
#define I2S_WS 13
#define I2S_DOUT 2
#define I2S_DIN 34
/* M5Stack WM8978 MCLK gpio number */
#define I2S_MCLKPIN 0
Audio audio;
WM8978 dac;
void setup() {
/* Setup wm8978 I2C interface */
if (!dac.begin(I2C_SDA, I2C_SCL)) {
ESP_LOGE(TAG, "Error setting up dac. System halted");
while (1) delay(100);
}
dac.setSPKvol(40); /* max 63 */
dac.setHPvol(32, 32);
WiFi.begin("xxx", "xxx");
while (!WiFi.isConnected()) {
delay(10);
}
/* set i2s pins */
audio.setPinout(I2S_BCK, I2S_WS, I2S_DOUT);
/* Start MCLK */
audio.i2s_mclk_pin_select(I2S_MCLKPIN);
ESP_LOGI(TAG, "Connected. Starting MP3...");
audio.connecttohost("http://icecast.omroep.nl/3fm-bb-mp3");
}
void loop() {
audio.loop();
}
#include <Wire.h>
#include <WM8978.h> /* https://github.com/CelliesProjects/wm8978-esp32 */
#include <Audio.h> /* https://github.com/schreibfaul1/ESP32-audioI2S */
/* M5Stack Node I2S pins */
#define I2S_BCK 5
#define I2S_WS 13
#define I2S_DOUT 2
#define I2S_DIN 34
/* M5Stack WM8978 MCLK gpio number */
#define I2S_MCLKPIN 0
WM8978 dac;
Audio audio;
void setup() {
if (!Wire.begin(21, 22, 400000))
ESP_LOGE(TAG, "i2c setup error!");
if (!dac.begin())
ESP_LOGE(TAG, "WM8978 setup error!");
dac.setSPKvol(40); /* max 63 */
dac.setHPvol(32, 32);
WiFi.begin("xxx", "xxx");
while (!WiFi.isConnected()) {
delay(10);
}
/* set i2s pins */
audio.setPinout(I2S_BCK, I2S_WS, I2S_DOUT);
/* Start MCLK */
audio.i2s_mclk_pin_select(I2S_MCLKPIN);
ESP_LOGI(TAG, "Connected. Starting MP3...");
audio.connecttohost("http://icecast.omroep.nl/3fm-bb-mp3");
}
void loop() {
audio.loop();
}
To show ESP_LOGx
messages on the Serial port, compile with Tools->Core Debug Level
set to Info
.