gvJaime / Sunrise

3D Printable DLP 3D printer

https://waffle.io/elgambitero/Sunrise

gvJaime/Sunrise Issues

Adopt Angel's style of making bolts
Updated 8 years ago
Solve FreeCAD 0.16 Mirror catastrophe
Closed 8 years ago
Would it be possible to port the idea of gasoline refilling to VAT refilling?
Updated 9 years ago
Make holes in Sunrise's feet to place pegs for better grip
Closed 9 years ago
There's no human way to put the upper front nut in UpperNode
Closed 9 years ago1
PolyVAT doesn't give a proper way to fix the polycarbonate to the upper part
Updated 9 years ago
Use glass instead of methacrylate
Updated 9 years ago
LowerNodeTip side 30x30 profile bolts are misaligned
Closed 9 years ago
Z axis twists a bit.
Closed 9 years ago2
Make groove in PolyVATTop for the shield to fit in.
Updated 9 years ago
Reorganise profile usage
Closed 9 years ago
General assembly redefining
Updated 9 years ago
The VAT needs a lane for the resin to be poured properly
Updated 9 years ago
Flexible polycarbonate VAT
Updated 9 years ago
Make Oscar's auto leveling system files.
Closed 9 years ago1
VAT Doesn't fit in a 20x20 buildplate
Updated 9 years ago
Make interchangeable build surface system for intensive research.
Updated 9 years ago1
Optoma focus is uneven along projection surface
Updated 9 years ago1
Membrane must be next to glass to make leveling possible
Closed 9 years ago
Turn BaseToMainBeam holes into slots for easier assembly
Updated 9 years ago
Flexivat tears the membrane upon assembly
Updated 9 years ago
Make repo clone/fork instructions
Closed 9 years ago
Upper FlexiVAT doesn't hold the membrane by the sides.
Closed 9 years ago1
A too tight membrane tolerance traps the air in between the glass and membrane
Closed 9 years ago
Platform needs more freedom to move while homing
Closed 9 years ago
Zcarriage nut has backlash
Updated 9 years ago
Bellow UV protection for projector.
Closed 9 years ago1
Methacrylate enclosure for build environment
Closed 9 years ago1
Make grooved ball leveling system.
Closed 9 years ago
PlatformHold's M4 nuts won't fit the lane
Closed 9 years ago
Zcarriage bends
Closed 9 years ago1
Cool magnet for electronics holder
Updated 9 years ago1
ProjectorCarriage spindle hole is too tight
Closed 9 years ago
ElecHolderLower bolts can't be put in place
Closed 9 years ago
QuickFit collides with RVATHolder in open position
Closed 9 years ago
QuickFit has no mechanism to hold the 623zz bearing
Closed 9 years ago
test
Closed 9 years ago