SonarQube Delphi

Is a SonarQube (http://www.sonarqube.org/) plugin and provides

49 Rules for Delphi
TestCoverage using DelphiCodeCoverage or AQtime (license needed)
Optional .html output for TestCoverage
Unittests results using DUnitX

This is Plugin-Version 1.0 SonarQube 7.9(LTS) or higher is needed (tested with SonarQube 7.9.3 and 8.2.0) It is is mainly an updated version of https://github.com/fabriciocolombo/sonar-delphi all credit goes to them. I have hosted it here since the orignal developer isn't active anymore.

This plugin was originally a Sabre Airline Solutions donation.

License

The entire PLugin follows the GPL: https://github.com/SandroLuck/SonarDelphi/blob/master/src/LUCK_LICENSE.txt

Reporting Issues

SonarQube Delphi Plugin uses GitHub's integrated issue tracking system to record bugs and feature requests. If you want to raise an issue, please follow the recommendations below:

Before you log a bug, please search the issue tracker to see if someone has already reported the problem.
If the issue doesn't already exist, create a new issue
Please provide as much information as possible with the issue report, we like to know the version of SonarQube Delphi Plugin that you are using, as well as the SonarQube version.
If possible try to create a test-case or project that replicates the issue.

Implemented Features

Counting lines of code, statements, number of files
Counting number of classes, number of packages, methods, accessors
Counting number of public API (methods, classes and fields)
Counting comments ratio, comment lines (including blank lines)
CPD (code duplication, how many lines, block and in how many files)
Code Complexity (per method, class, file; complexity distribution over methods, classes and files)
LCOM4 and RFC
Code colorization
Assembler syntax in grammar
Include statement
Parsing preprocessor statements
Rules
Tagable Issues
"Dead" code recognition
Unused files recognition
Unused functions
Unused procedures (Optional with AQtime and DelphiCodeCoverage)
- Coverage using AQtime
- Sufficient Coverage on new Code (Optional with DUnit)
- Test results

Steps to Analyze a Delphi Project

Install SonarQube Server (see Setup and Upgrade for more details). Check supported versions of the latest release of the plugin.
Install one of the supported Runners (see below) and be sure you can call it from the directory where you have your source code
Install Delphi Plugin (see Installing a Plugin for more details). NOTE: This only applies to SonarQube 7.9(LTS) and heigher. For older versions see Delphi Plugin
Check the sample project corresponding to your Runner to know which config file you need to create. You can find the samples in sonar-delphi/samples.
Run your Analyzer command from the project root dir
Follow the link provided at the end of the analysis to browse your project's quality in SonarQube UI (see: Browsing SonarQube)

Supported Runners

To run an analysis of your Java project, you can use the following Runners:

SonarQube Scanner: recommended for all projects
See https://github.com/fabriciocolombo/sonar-delphi for diffrent approacheds which have not been tested yet with 0.3.4

Code Assumptions

Grammar is NOT case insensitive, but Delphi code is. Plugin deals with it by DelphiSourceSanitizer class, which feeds ANTLR parser lowercase characters (the "LA" method)
Number of classes includes: classes, records
Directory is count as a package. Number of packages equals number of directories.
Preprocessor definitions between {$if xxx} and {$ifend} are removed (DefineResolver class).
Sources imported to SonarQube are parsed through IncludeResolver class. It means, that the source will be lowercased and unknown preprocessor definitions will be cut out.

CodeCoverage and unit testing

CodeCoverage can be done through the DelphiCodeCoverage tool. Use

CodeCoverage.exe -xml -xmllines

to create a XML output that can be importeded through this plugin. Therefore you have to edit your sonar project properties:

sonar.delphi.codecoverage.tool=dcc
sonar.delphi.codecoverage.report=Test/CoverageResults/CodeCoverage_Summary.xml

Unittests with DUnit

To import the testresults from DUnit, you have to use the [DUnit extension] (https://github.com/mendrix/dunit-extension) and use the supplied runner (it is not necessary to change your test classes to TTestCaseExtension).

ExitCode := TTestRunnerUtils.RunRegisteredTests;

This will run your tests with GUI if no parameters are given. With the parameter -xml the tool will create a XML output that is compatible with JUnit for SonarQube. With -output your can specify the output directory

MyTester.exe -xml -output <outputdirectory>

To import these test results, add the following line to your sonar project properties:

sonar.junit.reportsPath=TestResults

You also have to specify where the plugin can find your testfiles. It is important that the sourcefiles from your tests are EXCLUDED in your sources directory.

sonar.exclusions=MyTestFiles/*
sonar.tests=MyTestFiles

Unittests with DUnitX

It is also possible to import results from DUnitX. Therefore you have to add the file

DUnitX.Loggers.XML.SonarQube.pas

to your DUnitX project. Then change the .dpr of your application and add functionality for a sources directory (this is used to find the correct .pas file corresponding to the Delphi unit of the unittest):

TOptionsRegistry.RegisterOption<String>('sources', 's', 'Specify a file with on each line a directory where the PAS-files of the unittests can be found.', procedure (AString: String) begin
  LSourcesDir := AString;
end);
sqLogger := TDUnitXXMLSonarQubeFileLogger.Create(LSourcesDir, TDUnitX.Options.XMLOutputFile);
runner.AddLogger(sqLogger);

To import the resulting XML file, add the following line to your sonar project properties:

sonar.testExecutionReportPaths=Test/TEST-dunitx-sqresults.xml

Unittests with code coverage example

To have both codecoverage and unittests results for SonarQube, you have to combine above options. For example:

CodeCoverage.exe -e MyTester.exe -m MyTester.map -a ^^-xml^^ ^^-output TestResults^^ -ife -spf sourcedirs.txt -uf unitstotest.txt -od CoverageResults\ -html -xml -xmllines

How to build the plugin

Prerequisites

To build a plugin, you need Java 8 and Maven 3.1 (or greater).

JDK
Maven

Compile and test

mvn compile
mvn test

Package as plugin

mvn package

Now you can copy the plugin from the /target/ directory to the SonarQube plugin directory.

Importing into Eclipse

First run the eclipse maven goal:

mvn eclipse:eclipse

The project can then be imported into Eclipse using File -> Import and then selecting General -> Existing Projects into Workspace.

Importing into Intellij

Simply open the pom.xml in Intellij should solve most dependecies by itself.

How to develop and debug the plugin

SonarQube has great documentation about developing a plugin. To debug this plugin with the SonarQube scanner you to just set the following environment variable (on Windows):

SET SONAR_SCANNER_OPTS="-agentlib:jdwp=transport=dt_socket,server=y,suspend=y,address=8000"

Now you attach your Eclipse (or other) debugger to port 8000 to start debugging.

Changing the grammar with ANLTRWorks

The plugin uses an ANTLR3 grammar to parse the Delphi language. The grammar definition can be found in /src/main/antlr3/org/sonar/plugins/delphi/antlr/delphi.g. An easy way to check and modify this grammar is using ANTLRWorks. Here you can test your grammar on new files and implement new language definitions.

After successfully changing and testing the Delphi.g grammar you have to generate the new parser code (menu Generate, option Generate Code). Now copy the files DelphiLexer.java and DelphiParser.java from /src/main/antlr3/org/sonar/plugins/delphi/antlr/output/ to /src/main/java/org/sonar/plugins/delphi/antlr/ and (re)build the plugin.

Note: it is important to make sure your new grammar changes are also tested. If you only have to make sure that they can be parsed without errors, you can add your new language features to one of the existing grammar files in /src/main/java/org/sonar/plugins/delphi/antlr (the newest is GrammarTest2020.pas).

gutogirardon / SonarDelphi