ZX Spectrum 128K for MiSTer Board

Some verilog models from Till Harbaum Spectrum core were used in this project.

Features:

Fully functional ZX Spectrum 48K, 128K, +3 and Pentagon 128 with correct CPU and Video timings.
Pentagon 1024K and Profi 1024K memory interfaces.
Turbo 7MHz, 14MHz, 28MHz, 56MHz.
ULA+ v1.1 programmable palettes with extended Timex control.
Timex HiColor, HiRes modes.
TAP tape format with turbo (direct byte injection) and normal loading.
TZX and CSW tape formats with fast(16x) and normal loading.
Z80 snapshot loading.
TR-DOS (Beta Disk Interface) - TRD(read/write) and SCL(read-only) images.
G+DOS (MGT +D Disk Interface) and IMG, MGT images (only in non +2A/+3 memory modes).
+3 Disk drive usable with +3DOS.
Multiface 128 and Multiface 3 (in +3 mode) add-on.
Memory snapshot save/load in +D and Multiface.
Kempston Mouse.
Joysticks: Kempston, Sinclair I/II, Cursor
General Sound with 512KB-2MB of RAM
Turbosound-FM (dual YM2203 incl. dual YM2149)
SAA1099

Installation:

Copy the *.rbf and spectrum.rom files to the root of the SD card.

Notes about supported formats:

TRD is TR-DOS image used with Beta Disk Interface (BDI). To use TR-DOS you need to choose TRD image in OSD first. In 128K mode use menu to enter TR-DOS. In 48K mode use command RANDOMIZE USR 15616 to enter TR-DOS. In +3 mode, enter to 48K mode from the +3 BASIC via the USR0 command, then issue RANDOMIZE USR 15616. Use command RETURN to leave TR-DOS.

IMG is G+DOS image used with +D Disk interface. Although it's fully supported, i couldn't find any games on such disks. The main purpose of these images is to use snapshot function of +D and Multiface.

MGT is G+DOS and MasterDOS (SAM Coupe) image. It's similar to IMG but uses different layout. The main purpose is to transfer data to/from SAM Coupe.

DSK +3 disk format. In none- +3 modes, +D tries to mount it, however +3 disk images are not compatible with G+DOS. The original +3 disk drive is a single-sided single-destiny drive, but this core supports double-sided double-destiny images, too. An empty DSDD image is great for saving from Multiface. Note: in +3 mode, both the Beta and the +3 disk drive are supported, but only one image can be mounted, so both cannot be used at the same time.

TAP is simple tape dump format. It is possible to use normal and turbo loading (only if application uses standard loading routines from ROM). To load in turbo mode, you need to choose TAP file in OSD first and then start to load app through menu (128K) or by command LOAD "" (48K, 128K). To load TAP file in normal mode through internal AUDIO IN loop, you need to start loading through menu or command first and then choose TAP file though OSD. If application uses non-standard loader, then TAP file will be played in normal mode automatically. Thus it's safe to always choose the turbo mode. Some applications are split into several parts inside one TAP file. For example DEMO apps where each part is loaded after finish of previous part, or games loading levels by requests. The core pauses the TAP playback after each code part (flag=#255). If application uses standard loader from ROM, then everything will be handled automatically and unnoticeable. If app uses non-standard loader, then there is no way to detect the loading. In this case you need to press F1 key to continue/pause TAP playback. Do not press F1 key while data is loading (or you will have to reset and start from beginning). To help operate with TAP (for non-standard loaders) there is special yellow LED signaling:

LED is ON: more data is available in TAP file.
LED is flashing: loading is in process.
LED is OFF: no more data left in TAP file.

In normal mode, while TAP loading, the following keys can be used:

F1 - pause/continue
F2 - jump to previous part (if pressed while pilot tone), or beginning of current part (if pressed while code is transferring).
F3 - skip to next part

If game uses non-standard loader, then loading usually paused after loading of first part. Press F1 to continue loading.

OSD option Fast tape load increases CPU frequency to 56MHz while tape loading.

Use F10 key to switch into 48K basic (won't lock 48K mode) and automatically enter LOAD "" if game/app doesn't load from 128K menu.

Turbo modes

You can control CPU speed by following keys:

F4 - normal speed (3.5MHz)
F5 - 7MHz
F6 - 14MHz
F7 - 28MHz
F8 - 56MHz
F9 - pause/continue Speed can be controlled from OSD as well.

Due to SDRAM speed limitation 28MHz and 56MHz speeds include wait states, so effective CPU speed is lower than nominal.

Memory Configurations with extra RAM:

Pentagon 512K uses bits 6 and 7 in port 7FFD to access additional memory.
Profi 1024K uses bits 0-2 in port DFFD to access additional memory.

Mouse and Joystick:

Kempston mouse has no strict convention which bit (D0 or D1) reflects a main button. After each reset, the first button pressed on mouse (left or right buttons only) will be represented by bit D0 (other button will be represented by bit D1). So, if you are not satisfied by mouse button map, then simply press reset and then press other button first. Due to port conflict with Kempston joystick, core uses autodetection. Any mouse activity will switch port to mouse control. Any joystick activity will switch port to joystick control. Some games/apps autodetect the mouse. So, move the mouse or click its button before use such games/apps.

Snapshots:

Core supports snapshot functionality of +D. In order to use it, you need to mount IMG or MGT image. ROM includes preloaded G+DOS image, thus you can mount IMG/MGT at any time (even while playing the game). Note #1: preloaded G+DOS has been patched to allow disk change on-the-fly. So, if you will load G+DOS from disk, then be careful - it may corrupt previous saves if you will change the disk! Note #2: only one disk image can be mounted at any time. Thus make sure if you use game from TRD image, the game won't save anything later to its disk.

To save snapshot using +D (preferred way), press F11 key. You will see stripes on border and game will freeze. You can press following keys:

3 - to save the screen.
4 - to save 48K snapshot.
5 - to save 128K snapshot. Original +D ROM requires to press additional Y/N keys in 128K mode to choose the correct screen buffer. Included ROM has been pre-patched to automatically detect the screen. So, just press 5 for 128K snapshot.

To load snapshot, just mount IMG/MGT and go to basic prompt where type CAT 1 to list its content. Note the number of snapshot file. Then type LOAD pX where X is the number of shapshot file. For other disk commands please find and read G+DOS (MGT +D) manual.

Multiface 128 and Multiface 3:

You can enter Multiface ROM using RShift+F11. Multiface 128 includes preloaded debugger (Genie) where you can trace or modify the game. If you prefer to use bare Multiface 128 ROM then do following procedure: Press and hold ESC, then press RShift+F11. You will be able to use bare Multiface ROM by simple subsequent presses of RShift+F11 till core reload. Multiface provides snapshot functionality by saving to IMG/MGT disks. Please find and read Multiface 128 manual. Note: Multiface 128 expose its port, thus if game has protection against Multiface, it won't work, unless you press (o)ff before you exit from the Multiface menu. Thus using +D snapshot is prefered. When using the Spectrum +2A/3 mode, the Multiface 3 is supported. There's no Genie for the +3, but there are useful toolkit routines in the stock ROM.

Special Keys:

Ctrl+F11 - warm reset
Alt+F11 - cold reset will disk unload
Ctrl+Alt+F11 - reset to ROM0 menu
F10 - switch to Basic 48 (without 48K lock) and issue LOAD""
RShift+F10 - same as F10 with 48K lock
F11 - enter +D snapshot menu (or ROM0 menu if IMG/MGT not mounted)
RShift+F11 - enter Multiface 128 menu
F12 - OSD menu

Quick switch between models:

Alt+F1 - ZX Spectrum 48K (48KB, ULA-48)
Alt+F2 - ZX Spectrum 128K (128KB/+2, ULA-128)
Alt+F3 - ZX Spectrum +3 (128KB +3, ULA-128)
Alt+F4 - Pentagon 48K (48KB, Pentagon)
Alt+F5 - Pentagon 128K (128KB, Pentagon)
Alt+F6 - Pentagon 1024K (1024KB, Pentagon) CPU speed will reset to original.

Download precompiled binaries and system ROMs:

Go to releases folder.

gschorcht / ZX-Spectrum_MISTer